Menu
Quirky AROS Operating Instructions Manual
Also see for AROS: User manual
         | |
AROS | 4 AROS | 5NOTE The default temperature reading on the display is degreeFahrenheit (°F). To change the display to degree Celsius (°C),press Temperature Increase and Temperature Decrease at thesame time and hold for 3 seconds. Repeat the process to changeback to degree Fahrenheit (°F).DO NOT OPERATE IN FREEZING OUTDOOR CONDITIONSThis air conditioner was not designed for and should not beused in freezing outdoor conditions.COOL MODEUse the Cool mode at Low, Med or High for cooling. Use theTemperature Increase / Decrease controls to set the desiredtemperature between 64°F and 86°F in 1°F increments.An electronic thermostat is used to maintain the roomtemperature. The compressor will cycle on and off to keep theroom at the set level of comfort. Set the thermostat at a lowernumber and the indoor air will become cooler. Set the thermostatat a higher number and the indoor air will become warmer.NOTE If aros is off and is then turned on while set to a coolsetting or if turned from a fan setting to a cool setting, it maytake approximately 3 minutes for the compressor to start andcooling to begin.COOLING DESCRIPTIONS:For normal cooling - Select the Cool mode andHigh or Med fan with a middle set temperature.For maximum cooling - Select the Cool modeand High fan with a lower set temperature.For quieter and nighttime cooling - Select theCool mode and Low fan with a middle set temperature.ECO MODEThis mode optimizes the cooling power of your air conditioner,thereby saving you energy. Once the set point temperaturehas been reached, the fan will cycle off to save energy. The fanwill cycle back on periodically to ensure all cooling capacity inthe system is used. This mode is the default mode for the unit.Each time the unit is powered off, it will restart in Eco mode ON.The first time the unit is turned on, the settings will be 70° andLow fan. You can adjust the fan speed and temperature to yourpersonal comfort.Eco ON helps minimize electricity use. It is normal for the fanto cycle off and then back on in this mode. This on/off cyclecan repeat multiple times. Because the fan will cycle off,you may notice a variation in room temperature and humidity.Eco OFF When this mode is not engaged, the fan will runcontinuously, and in Cool mode the compressor will cycle onand off to maintain room temperature.FAN-ONLY MODEUse the Fan-only mode at Low, Med or High fan speed to provideair circulation and filtering without cooling. Since fan-onlysettings do not provide cooling, a set temperature cannot beentered. The room temperature will appear in the display.POWER OUTAGE RECOVERY FEATUREIn the case of a power outage or interruption, the unit willautomatically restart in the settings last used after the poweris restored.POWERTurns air conditioner on and off. When turned on,the display will show the room temperatureMODEUse to set the air conditioner to Cool, Eco, or Fan-only modeFAN SPEEDUse to set the fan speed to High, Med or Low on the unitTEMPERATURE INCREASE / DECREASEUse up and down arrows to set temperaturewhen in Cool or Eco modeDISPLAYShows the room temperature. Shows the set temperaturewhile setting the temperature in Cool or Eco modes.ABOUT THE CONTROLS ON THE AIR CONDITIONERLights will illuminate next to each option when activatedto indicate the selected settings.OPERATING INSTRUCTIONSABOUT SMART TECHNOLOGYAros has smart features that extend its functionality. It can becontrolled from the Wink app on your mobile device and set togather information about your schedule, location, usage, andmore—to help automatically and efficiently maintain the perfecttemperature for your home.For more information, download and launch the Wink app onyour mobile device then follow its instructions to connect. |
Related manuals for Quirky AROS
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved