Quantum Data 780C User Manual

Contents

Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Changes to this User Guide
Overview of 780C features
Network Analyzer features
Auxiliary Channel Analyzer for DDC monitoring features
Physical Interfaces of the 780C Multi-Interface Interoperability Tester
Audio interfaces
General Operation
Navigating through the 780C User Interface
Back Navigation
Status Bar
Calibrating the LCD
Using the 780C Test Instrument to Video and Audio Pattern Tests on Sink Devices
Connecting the 780C to the Display Device - HDBaseT
Connecting the 780C to the Display Device - Analog
Procedures for Selecting an Resolution and Frame Rate – HDMI and HDBaseT
Procedures for Enabling AVMute
Procedures for Selecting a Resolution and Frame Rate – SDI
Rendering Test Patterns on an HDTV
Using Custom Test Image Packs
Outputting 3D Test Patterns through HDMI or HDBaseT
Procedures for Obtaining 3D Bitmaps on HDMI or HDBaseT Sink Device
How to Scroll or Pan a Bitmap Pattern
Procedures for Panning Bitmaps
Testing Digital Audio on an HDTV or A/V Receiver
Procedures for Testing a Display with Dolby Digital or DTS Audio Test Patterns
Procedures for Testing a Display with Dolby Digital or DTS Sine Wave Clips
Procedures for Testing with Programmable Sine Waves
Testing HDMI Audio Return Channel (ARC) 780C only
Using the 780C Test Instrument to Test HDMI and HDBaseT Protocols on Sink Devices
Procedures for Testing HDCP on an HDMI or HDBaseT Sink Device
Verifying the EDID on an HDMI, HDTV, HDBaseT Projector or HDMI Repeater Device
Configurations for Verifying and Viewing the EDID on an HDBaseT Sink Device or Input of an HDBaseT Distribution Device
Workflow for Comparing EDIDs
Viewing the CEC devices on an HDMI/HDBaseT network
Procedures for Testing CEC on an HDMI/HDBaseT Sink Device
Multi-protocol (HDCP, EDID and CEC) testing on an HDMI or HDBaseT HDTV or Projector
Using the 780C Test Instrument to Test HDMI or HDBaseT Source Devices
Connection Configurations for Testing HDBaseT Outputs on Repeater and Distribution Devices
Procedures for Viewing Video on an HDMI/HDBaseT Source Device
Viewing the Incoming 4K HDMI/HDBaseT Video on a Connected Display using Passthrough
Viewing Video Metadata from an HDMI/HDBaseT Source Device
Procedures for Viewing Video on an SDI Source Device
Viewing Video Metadata from an SDI Source Device
Viewing Source Data Island Packets on HDMI and HDBaseT
Procedures for Viewing the HDMI/HDBaseT Data Island Packets from a Source Device
Testing HDCP Max Devices on an HDMI Source Devices and Outputs of HDBaseT distribution Devices
Procedures for disabling HDCP on the 780C HDMI/HDBaseT Out port - GUI
Testing Audio of an HDMI Source Device or at the Output of an HDBaseT Distribution Device
Configurations for Testing Audio on the Output of an HDBaseT Distribution Device
Procedures for Testing Audio from an HDMI/HDBaseT Source Device
Procedures for Audible Monitoring of LPCM Audio from an Digital Video Source Device
Testing an HDMI or HDBaseT Source's Response to EDIDs
Procedures for Testing an HDMI Source Devices Response to an EDID
Using the 780C Test Instrument Installer Test Utility
Diagnosing HDMI and HDBaseT Interoperability Problems toward the Source - Upstream
Connection Configurations for Testing HDBaseT Source Devices
Diagnosing HDMI and HDBaseT Interoperability Problems at the Sink - Downstream
Procedures for Testing Downstream (Sink Test) with the Installer Utility
Diagnosing HDMI/HDBaseT Interoperability Problems with a Repeater
Procedures for Testing Repeaters (Repeater Test) with the Installer Utility
Diagnosing HDMI/HDBaseT Interoperability Problems in an HDMI/HDBaseT Network
Using the 780C to Monitor the HDMI/HDBaseT CEC and DDC channel
Auxiliary Channel Analyzer – Emulation Monitoring of DDC on Sink
Configurations for Monitoring DDC Transactions with ACA on HDMI Sink Devices
Monitoring DDC Transactions with ACA on HDMI or HDBaseT Sink Devices
Configurations for Monitoring DDC Transactions with ACA on HDMI Source Devices
Procedures for Monitoring the DDC Transactions using the Auxiliary Channel Analyzer on HDMI or HDBaseT Source Devices
Configuration for Monitoring DDC Transactions with the ACA on an HDMI or HDBaseT Repeater or distribution device
Procedures for Running an Auxiliary Channel Analyzer Test on HDMI/HDBaseT Repeater or Distribution Devices
Auxiliary Channel Analyzer – Passive Monitoring
Auxiliary Channel Analyzer – Monitoring of CEC Messages
Procedures for Passive Monitoring HDMI CEC messages with the Auxiliary Channel Analyzer
Using the 780C Test Instrument to Test HDMI Cable or Repeaters
HDMI Frame Compare Test
Procedures for Running the Remote PRN Test
Running the Automated EDID Tests on HDMI Source Devices
Configurations for Running an Auto EDID Test
Procedures for Running the Auto EDID Test
Viewing the Auto-EDID Test report
Creating and Using Custom Formats, EDIDs, Bitmaps and Menus
Adding Reference EDIDs for Use in Testing HDMI Devices
Procedures for Saving an EDID into the 780C
Using Custom Bitmaps
Procedures for Loading Bitmaps from SD Card
Creating Custom Menus
To create a custom menu
Command Interface
Procedures for using the Command Line Interface through RS-232 Port (780C only)
Procedures for Entering Commands
Using the Keypad
Keypad Functionality
Selecting a Format (Timing)
Selecting a Test Pattern (Image)
Programming a Test Sequence using the keypad
Programming a Test Sequence in the UserKeys file
Upgrading the 780C

Quantum Data 780C User Manual Manual pdf 82 page image

780C Multi-Interface Interoperability Tester – User Guide Page 81September 29, 2014 Revision A15.3.2 Procedures for Testing CEC on an HDMI/HDBaseT Sink DeviceUse the following procedures to test CEC on an HDMI/HDBaseT sink device.1. Connect the 780C HDMI/HDBaseT OUT port to an HDMI/HDBaseT sink device (e.g. HDTV or A/Vreceiver) using the configuration guidelines provided above.2. Follow the procedures above for Selecting a Signal Type and Resolution to enable the HDMI/HDBaseToutput.3. Touch select CEC Test from the Home menu shown below.The CEC devices on the HDMI network are presented on the display as shown below: