3 – Managing FabricsZoning3-30 59235-03 AS Select a port by port number, Fibre Channel address, or World WideName in the Port/Device tree, and drag it into the zone. Select a port by port number, Fibre Channel address, or World WideName in the Port/Device tree. Right-click the zone and select AddZone Members from the popup menu.6. Click the Apply button to save changes to the zoning database.Copying a Zone to a Zone SetTo copy an existing zone and its membership from one zone set to another, do thefollowing:1. In the faceplate display, open the Zoning menu and select Edit Zoning toopen the Edit Zoning dialog.2. In the zone set tree, select the zone to copy and click the Copy button.3. Select the destination zone set, and click the Paste button.4. Click the Apply button to display the Save Zoning & Error Check dialog.5. Click the Perform Error Check button to have the application check forzoning conflicts, such as empty zones, aliases, or zone sets.6. Click the Save Zoning button to implement the changes.7. Click the Close button to close the Error Check dialog.Adding Zone MembersYou can zone a port/device by switch domain ID and port number, device portFibre Channel address, or the device port WWN. Adding a port/device to a zoneaffects every zone set in which that zone is a member. To add ports/devices to azone, do the following:1. Open the Zoning menu, and select Edit Zoning to open the Edit Zoningdialog.2. Choose one of the following methods to add the port/device: Select a port/device in the Port/Device tree, and drag it into the zone.To select multiple ports/devices, press the Control key while selecting. Select a port/device in the Port/Device tree. To select multipleports/devices, press the Control key while selecting. Select a zone setin the left pane. Open the Edit menu and select Add Members. Select a port/device in the Port/Device tree. To select multipleports/devices, press the Control key while selecting. Select a zone setin the left pane. Click the Insert button.If the port/device you want to add is not in the Port/Device tree, you can addit by doing the following:
