3–Viewing Router InformationRouter BladesISR654602-00 D 3-11 IP Address indicates the management port’s IP address. Subnet Mask indicates the management port’s subnet mask. Gateway indicates the IP address of the server acting as agateway to your Internet connection. IPv6 Management Info: Select this check box to use IPv6 (Internet Protocolversion 6, 128-bit addressing), and then click the appropriate button toidentify whether to use either a dynamic or static IP address: Click Auto to automatically obtain the IPv6 information. Click Manual to manually enter the following IPv6 information: IPv6 Address1 indicates the first user-assigned IPv6 address towhich the port responds. A value of :: indicates that an IPv6address has not been assigned. Although you may modify the IPaddress in this window, you typically set it using theConfiguration Wizard. IPv6 Address2 indicates the second user-assigned IPv6address to which the port responds. A value of :: indicates thatan IPv6 address has not been assigned. Although you maymodify the IP address in this window, you typically set it using theConfiguration Wizard. IPv6 Default Router indicates the address of the default routerfor the IPv6 protocol. The system can also dynamically set theIPv6 default router depending on your network configuration. IPv6 Local Link indicates the IPv6 link local address of the port.It is not editable. Set IP Address. After making any IP address changes, click this button tosave your changes.NTP Server InformationSelect the third vertical tab on the router blade’s Information page to view the NTPServer Information page (Figure 3-5).NOTE:IPv6 support is available only with hardware version 6 and later andsoftware version 2.4.0.0 and later.
