3–Configuring CHAPNormal Session—Uni-directional CHAPISR654601-00 D 3-5Normal Session—Uni-directional CHAPFollow this procedure to configure a uni-directional CHAP used during a normalsession.To configure uni-directional CHAP in a normal session:1. Do not enable CHAP on the presented target.2. Execute the initiator add command as follows:a. Add the initiator that is about to do a normal login.b. Enable the CHAP for this initiator.c. Create a secret (for example, secret_initiator).d. To update the CHAP settings of the initiator, execute the set chapcommand.3. Go to the MS Initiator.4. Click Targets.5. Select the target you want to log into.6. Click Advanced.7. Select Chap Login Information.8. In Target Secret, type the secret (secret_initiator) that you created inStep 2.9. Click OK.10. Click OK.The initiator completes the normal login.
