Qlogic 12000 User Manual

Also see for QLogic 12000 Series: Installation guide Site planning guide Quick start guide Reference guide User guide

Contents

Qlogic 12000 User Manual Manual pdf 7 page image

D000101-000 1-11 Operations andAdministrationChassis ViewerChassis Viewer is QLogic’s browser-based device management software. ChassisViewer provides the primary management interface for the QLogic 12000 switches,allowing the user to perform management, configuration, and monitoring tasksrelated to InfiniBand networks.• Chassis Viewer runs on the firmware of the 12200, 12300 and each managementmodule of the 12800 series.• The browser must be on a workstation which has connectivity to the RJ-45 OOBLAN port on the switch.• Management Workstation Requirements• Browser Level: Internet Explorer 6.0+ or Mozilla Firefox1.6.x+• To access Chassis Viewer, point a browser to the IP address of the switch.• If user authentication is enabled, the following screen is displayed:Figure 1-1 User Authentication• Enter the default user name and password: Username: admin Password: adminpass