Menu
Qihan PTZ User Manual
                                            | |
Contents
| 
17Operation Manual of Intelligent High Speed Dome Camera4.3.Color System PAL/NTSC<< PAL/NTSC switch Joystick left/right to select4.4. Reset Dome<< Restart the syetem of the Dome4.5.Dome Information<<Dome information Press OPEN or Joystick left/right to enterIRIS CLOSE to exit4.6.Comm Setings<< Comm Setings Joystick left/right to select① COMM MODE HW/SW<< Hardware ID Adress/Software ID Adress Joystick left/right to select② Dome ID 1 << ID Adress Of The Dome Joystick left/right to selectit can be set only by the R/W modeof the comm seting③ Baud Rate 1<< Baud Rate Of The Dome Joystick left/right to selectit can be set only by the R/W modeof the comm setingCamera:FCB-EX1020PProtocol:Pelco-DBaud rate: 2400Dome No.:1COMM MODE:HWSN :10000084IRIS CLOSE to exit<<Type of camera<<Control protocol<<Baud rate<<Dome number<<Communication Mode<<Serial Number<<Press CLOSE to exit and return to upper stage menu.<< Press CLOSE to exit and return to upper stagemenu.Are you sure to do this?IRIS OPEN to confirmIRIS CLOSE to cancel<<Reminder: are you sure to do this.Press OPEN to confirm.Press CLOSE to exit and return to upper stage menu. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved