Pioneer cdj-2000nxs2 Operating Instructions Manual

Also see for CDJ-2000NXS2: Operating instructions Operating instructions Quick start guide Connection guide Service manual

Contents

Storing cue or loop points1 Connect a storage device (SD, USB) to this unit.2 Set Cue Point or Loop Point.3 Press the [MEMORY] button.[ MEMORY] or [ MEMORY] is displayed for several seconds onthe main unit display, and the point information is stored on the storagedevice (SD, USB).Stored cue and loop points are indicated [b] at the top of the waveformdisplay.! When a track recorded on a disc is playing, if both an SD memorycard and a USB device are connected, the point information is storedwith priority on the SD memory card.The storage device to store the information to can be selected in[MENU]. It is also possible to select a storage device connected toother DJ players by PRO DJ LINK.! To store loop points, press the [MEMORY] button during loopplayback.Calling out stored cue or loop points1 Connect a storage device (SD, USB) to this unit.2 Load the track whose cue or loop points you want tocall out.Stored cue and loop points are indicated [b] at the top of the waveformdisplay.3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or[CUE/LOOP CALL d(LOOP 2X)] button.Press [CUE/LOOP CALLc(LOOP 1/2X)] to call out a point before thecurrently playing position, [CUE/LOOP CALLd(LOOP 2X)] to call out apoint after the currently playing position.The track cues to the called out point and pauses.! When multiple points are stored, a different point is called outeach time the button is pressed.! Loops set as active loops can also be called out as stored loops.! If a comment is set to the called out point by rekordbox, the com-ment is displayed in the area where the track name is displayed.4 Press the [PLAY/PAUSE f] button.Normal or loop playback starts from the point that was called out.Deleting stored cue or loop pointsDeleting points individually1 Connect a storage device (SD, USB) to this unit.2 Load the track containing the cue point or loop pointsyou want to delete.Stored cue and loop points are indicated [b] at the top of the waveformdisplay.3 Press the [CUE/LOOP CALL c(LOOP 1/2X)] or[CUE/LOOP CALL d(LOOP 2X)] button to call out thepoint to be deleted.The track cues to the called out point and pauses.! When multiple points are stored, a different point is called out eachtime the button is pressed.4 Press the [DELETE] button.[ DELETE] or [ DELETE] is displayed on the main unit display, andthe selected point information is deleted.! When a stored loop set as an active loop is deleted, the active loop isalso deleted.Deleting points in units of discs1 Load a disc in this unit.When tracks from a medium other than a disc are loaded, load any trackfrom the disc.2 Connect a storage device (SD, USB) to this unit.3 Press the [DELETE] button for over 5 second.[DISC CUE/LOOP DATA-DELETE? PUSH MEMORY] appears on themain unit display.4 Press the [MEMORY] button.All cue and loop points for the disc currently loaded in this unit aredeleted.! The delete mode is canceled if any button other than [MEMORY] ispressed.Deleting all the disc information storedon a storage device (SD, USB)Connect the storage device (SD, USB) on which the disc information isstored to this unit.1 Connect a storage device (SD, USB) to this unit.2 With no disc loaded on this unit, press the [DELETE]button for over 5 seconds.[DISC CUE/LOOP DATA-DELETE ALL? PUSH MEMORY] appears on themain unit display.3 Press the [MEMORY] button.All the disc information stored on the storage device (SD, USB) isdeleted.! The delete mode is canceled if any button other than [MEMORY] ispressed.Setting the cue point for autocueingThe cue point to be set as the auto cue can be selected using one of themethods below.Setting the cue point by the acoustic pressure levelidentified as a silent section (8 levels)–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dBAutomatically setting stored cues as cue pointsMEMORY: The stored cue point nearest the beginning of the track is setas the cue point for auto cueing.! When [MEMORY] is set, [A. CUE] lights in white on the main unitdisplay.The setting of the cue point for auto cueing can be changed using one ofthe methods below.1 Press the [MENU/UTILITY] button for over 1 second.The [UTILITY] screen is displayed.2 Turn the rotary selector then press it.Select [AUTO CUE LEVEL].3 Turn the rotary selector then press it.Select the acoustic pressure level or [MEMORY].Using beat jump/loop moveThe playback position can be moved one beat forward or backward.Touch [1BEAT].! If it is touched during loop playback, the loop playback positionmoves.! If the track’s BPM cannot be detected, the BPM is set to 130.! When the quantize function is on, the sound is matched to the beat,so there may be a slight delay in the function’s operation.En26