Pioneer SPH-DA01 Operation Manual

Also see for AppRadio SPH-DA01: Operation manual Operation manual Important information for the user Installation manual Installation manual

p You can set the system to automatically an-swer incoming calls. If not set to automati-cally answer incoming calls, you will haveto answer the calls manually.= For details, refer to Answering a callautomatically on this page.p The registered name appears if the phonenumber of the received call is already regis-tered in “Phone book”.1 To answer an incoming call, tap .# If you tap , an incoming call is rejected.The rejected call is recorded in the missed callhistory list.2 Tap to end the call.Using advanced functionsStopping Bluetooth wavetransmissionYou can stop transmission of electric waves byturning off the Bluetooth function. If you donot use the Bluetooth wireless technology, werecommend selecting “OFF”.1 Tap to open the optional menu.2 Tap [Bluetooth].Each tap of [Bluetooth] changes the settingas follows:! ON (default):Turns on Bluetooth function.! OFF:Turns off Bluetooth function.Setting the Bluetooth autoconnect functionYou can select to enable or disable theBluetooth auto connect function.1 Tap to open the optional menu.2 Tap [Auto Connect].Each tap of [Auto Connect] changes the set-ting as follows:! ON (default):Activates the Bluetooth auto connect func-tion.! OFF:Deactivates the Bluetooth auto connectfunction.Answering a call automaticallyYou can select to enable or disable auto an-swer for handling incoming calls.This product automatically answers incomingcalls to the iPhone, so you can answer a callwhile driving without taking your hands off thesteering wheel.1 Tap to open the optional menu.2 Tap [Auto Answer].Each tap of [Auto Answer] changes the set-ting as follows:! OFF (default):No automatic response. Respond manually.! ON:Answers incoming calls automatically.Editing the passwordYou can change the password to be used forauthentication on your iPhone. (Default is“0000”.)p Four characters can be entered for a pass-word.1 Tap to open the optional menu.2 Tap [Pairing Code].3 Enter the new password by using thekeyboard.# If you tap , the entered number is deletedone digit at a time from the end of the number.# If you tap [Clear], the entered password (PINcode) is cleared.4 Tap [Enter].The password is changed.En 17Chapter07 Using hands-free phoningUsing hands-free phoning