Pioneer PWM-T210 Installation Instructions Manual

Contents

PWM-T210Page 8 Installation InstructionsSecuring the Lower Wall Plate1. Level and secure the plate to the wallwith the reference arrow facing up to theceiling (Figure 11).2. Secure the plate using the provided lagbolts and washers.LevelWallPlateFigure 113. When the bottom wall plate is properlyinstalled to the wall.4. Lay the carton template on top of the wallplate.5. Lay the top wall plate on top of thecardboard template and mark the four (4)mounting points (Figure 12).Marked WallTemplateWall PlateFigure 12Securing the Upper Wall Plate1. Drill four (4) ¼" pilot holes in themarked wall (Figure 13). These pilot holeswill be for the upper mounting bracket.Figure 13WallMarksWallPlatesFigure 142. Level and secure the plate to the wall withthe reference arrow facing up to the ceiling.3. Secure the plate using the provided lagbolts (Figure 14).CAUTION: Do not over tighten themounting hardware.NOTE: CHECK THE MOUNT FOR PROPERTIGHTNESS AND SECURITY.Wall PlatesPower SourceArea

/ 11

Related manuals for Pioneer 210 - STEINER 210 MILITARY MARINE