Pioneer PDP 502MX Bulletin
Also see for PDP 502MX: Brochure & specsBulletinManual Service manualOperating instructions
PRODUCT I NFORMATION BULLETIN PIB # 351306PDP-V501 & 502MX – One PC Controlling Two or More Plasma DisplaysPage 1 of 2Pioneer New Media Technologies, Inc., Engineering Support (310) 952-2111O VERVIEW :Occasionally, an end-user needs to run multiple plasma displays in tandem. To run two or morePioneer 50x series of plasma displays from a single computer, use combi-cables (sold separately)when installing the displays. Using RS-232 commands sent to the serial port on each panel, onecomputer can control up to 16* displays.Note: Using a combi-cable with a plasma display disables the signal from the remote control.TECHNICAL DETAILS:A combi-cable consists of a 6-pin male mini DIN on each end and may be used as a PS2 extensioncable. These cables were designed to control video cubes for a video wall. Although a combi-cable isbundled with each Pioneer video-wall projector, these cables must be purchased separately for usewith plasma displays. Please contact Pioneer Parts at 800/228-7221 for assistance.The process of adding and synchronizing displays is explained in the PDP-502MX Technical Manual(Section 5.5) available on the Pioneer website. The set up process is the same for the PDP-V501plasma display panel. Earlier and smaller plasma display models, such as the PDP-V402, are unableto be synchronized.ADDITIONAL I NFORMATION:Refer to the PDP-502MX Technical Manual (available from the Pioneer website) section 5.5.4 for achart of RS-232C commands.Combi-cables are available from most computer and electronics retailers or may be ordered (PartNumber BDE1020) from Pioneer Parts at 800/228-7221.For additional assistance please contact your Pioneer representative or refer to the website:www.pioneer-america.com* For information about controlling more than 16 plasma displays from a single computer please contact theTechnical Support group at 310/952-2111. |
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved