![Pioneer PDA-5006KE Operating Instructions Manual Manual pdf 1 page image](https://manuals-archive2.s3.amazonaws.com/5505381/3dc790ce9a6b4ccec4dc929b55b4953e1f.jpg)
Pioneer PDA-5006KE Operating Instructions Manual
![]()
UBS Key PDA-5006KE Operating InstructionsThank you for buying this Pioneer product.Please read through these operating instructions so you will know how to operate your modelproperly. After you have finished reading the instructions, put them away in a safe place for futuerreference.¶ Microsoft ® Windows ®, Windows ® XP, Window® 2000 Professional, and Internet Explorerare registered brand names or brand names of Microsoft Corporation of the United States inthe United States and in other countries.¶ Adobe ® Reader® is a registered brand name or brand name of Adobe System Incorporated.¶ Intel® Pentium® is a registered brand name or brand name of Intel Corporation.¶ Other company names and product names in this Operating Instructions are registeredbrand names or brand names of the companies mentioned.EnglishSafety PrecautionsD3-4-2-1-1_En-AThe exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance.The lightning flash with arrowhead symbol,within an equilateral triangle, is intended toalert the user to the presence of uninsulated"dangerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk of electricshock to persons.CAUTION:TO PREVENT THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (ORBACK). NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENIMPORTANTOperating EnvironmentOperating environment temperature and humidity:0 ºC – +40 ºC (+32 ºF – +104 ºF); less than 85 %RH(cooling vents not blocked)Do not install this unit in a poorly ventilated area, or inlocations exposed to high humidity or direct sunlight (orstrong artificial light) D3-4-2-1-7c_A_En[For U.S. model]IMPORTANT NOTICE – THE SERIAL NUMBER FOR THIS DEVICE IS LOCATED NEAR THE USB CONNECTOR.PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN ASECURE AREA. THIS IS FOR YOUR SECURITY. D1-4-2-6-1_EnInformation to UserAlteration or modifications carried out without appropriateauthorization may invalidate the user’s right to operate theequipment. D8-10-2_En[For Canadian model]This Class B digital apparatus complies with CanadianICES-003.This product complies with the Low Voltage Directive(73/23/EEC, amended by 93/68/EEC), EMC Directives(89/336/EEC, amended by 92/31/EEC and93/68/EEC). D3-4-2-1-9a_EnNote for Dealers:After installation, be sure to deliver this manualto the customer and explain to the customerhow to handle the product.Safety warnings¶ How to useNever place any metal objects or easilycombustible objects in the connector of theUSB Key, as doing so could result indamage to the product.¶ Never leave the product within the reach ofinfants or small children, as doing so mightresult in the infant or child swallowing thedevice and result in asphyxiation. If aninfant or child seems to have swallowedthe device, consult a physician immediatelyfor assistance.WarningCautionScope of liability¶ Pioneer may not be held in any wayresponsible for any damage resulting froma failure to follow the instructions providedin this operating instructions.¶ Pioneer may not be held in any wayresponsible for the loss or alteration ofdata, interruptions in business operations,or any other secondary damage occurringas a result of the use of this USB key or thefailure of the product to operate properly.¶ Pioneer may not be held in any wayresponsible for any damages occurring as aresult of the use of this product due tofires, earthquakes, flooding or other naturaldisasters nor any damage occurring as theresult of the actions of any third parties orany other accidents, including anydeliberate actions or mistakes on the partof the user or the use of this product forany purposes other than its intendedpurpose.¶ Pioneer may not be held in any wayresponsible for any damage occurring as aresult of improper operation or otherproblems occurring as a result of the use ofthis product with any products notdesigned or manufactured by Pioneer.¶ Pioneer may not be held in any wayresponsible for the loss or destruction ofdata in the use of this product no matterwhat the cause of the problem or thenature and degree of damages.¶ Pioneer may not be held in any wayresponsible for any indirect damages,secondary damages, special damages, orother damages resulting from the use ofthe product or the inability to use theproduct (such damages include but are notlimited to the loss of data, damage ofreputation, leakage of data, loss of profit, orinterruption of business operations) even ifthe company is informed of the possibilityof any such damage occurring.¶ The use of this product may cause changesto occur in computer network settings, butPioneer cannot be held responsible forrestoring any such network settings to theiroriginal state.PDA-5006KE (USB key) is designed to automatically perform communications directly withNetPlasma (Adhoc). Also see the operating instructions provided with the PDA-5005NW card(network display card).÷ PDA-5006KE (USB Key) Operating Instructions ...... this documentThe following manuals are included with the USB key in PDF file.÷ Operating_Instructions(Operating Instructions for Connection, Operation, and Adjustment of the Plasma Display)÷ Using_NetPlasma÷ NetPlasma_Operating_Instructions_for_AdministratorYou need Adobe® Reader® to read a PDF file.Configuration of the Operating InstructionsWARNINGThis equipment is not waterproof. To prevent a fireor shock hazard, do not place any container filedwith liquid near this equipment (such as a vase orflower pot) or expose it to dripping, splashing, rainor moisture. D3-4-2-1-3_A_EnNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_EnWARNINGTo prevent a fire hazard, do not place any nakedflame sources (such as a lighted candle) on theequipment. D3-4-2-1-7a_A_EnWARNING: Handling the cord on this product orcords associated with accessories sold with theproduct will expose you to lead, a chemical known tothe State of California and other governmentalentities to cause cancer and birth defects or otherreproductive harm.D36-P4_EnWash hands after handlingCAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect theunit to other equipment. To prevent electromagnetic interference with electric appliances such as radios andtelevisions, use shielded cables and connectors for connections. D8-10-3a_EnFEDERAL COMMUNICATIONS COMMISSIONDECLARATION OF CONFORMITYThis device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions; (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Product Name: USB KEYModel Number: PDA-5006KEProduct Category: Class B Personal Computer & PeripheralsResponsible Party Name: PIONEER ELECTRONICS SERVICE, INC.Address: 1925 East, Dominguez, Street, Long Beach, CA90801-1760, USAPhone: 310-952-2915URL: http://PioneerUSA.comUsing the USB KeyThe USB Key is used in the following three ways. Remove the cap of the USB Key and insert itinto the USB connector (Connect it to the USB1.1 or the USB2.0 port).7 Reading files in the USB KeyUse a personal computer with Microsoft Windows 2000 or higher installed as its operatingsystem.7 Using it as a network keyUse it to connect to a personal computer without NetPlasma registration.A personal computer without registration must already have a wireless LAN environment.NetPlasma must be used to write wireless settings in advance. For detailed information, speakto your system administrator or read the “NetPlasma Operating instructions for Administrator”.Recommended personal computer specifications1 Insert the USB Key into the USB connector of the personal computer you want toconnect to.2 Operate it according to instructions on the NetPlasma Connector screen that isdisplayed on the personal computer.3 Be sure to exit from NetPlasma Connector after use. (Settings will automaticallyreturn to their defaults.)4 Always be sure to follow the instructions on “Removing the USB key” whenremoving the USB key.Names of parts and LED displayLED displayLit green: Indicates that USB key is connected topersonal computer.Flashing green: Indicates that data is being read,written or copied from computer.ProhibitionNever remove USB key while LED is flashing. Doing so may result in improper computeroperation or in loss or damage to data or USB key.¶ Bringing the USB key into a cold, unheatedroom or raising the temperature of theroom rapidly could cause condensation toform in the product. This could not onlycause the product to perform improperlybut could also result in damage to theproduct. If this happens, leave the productunused until the condensation dries andraise the temperature of the room graduallybefore use.¶ Never subject the device to shocks orvibrations or remove the USB key whiledata is being read or written.¶ Never turn off the power to your computerwhile data is being read from or written tothe USB key. Doing so could result in theloss or damage of internal data.¶ Always be sure that there is no data (i.e.,files) on the USB key before performing aninitialization. Failing to do so could result inthe loss of data.¶ Performing any of the following operationswhile the USB key is connected to yourcomputer could result in it failing to operateproperly: startup, restart, or recovery fromstandby or sleep mode.PDA-5006KECap LEDUSB connectorCPUIntel® Pentium® IIIProcessor 800MHz or higherRAM memory256MB or moreHDDUnused capacity of 20MB or moreUSB connectorUSB 1.1 or USB 2.0Operating system• Microsoft ® Windows® XP Professional Edition (Service Pack 1 or Service Pack 1a)Browser• Microsoft Internet Explorer 6.0 or higher |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved