7EnEnglishConnectionsBe sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.Refer to the operating instructions for the component to be connected.Connect the power cord after all the connections between devices have been completed.Connecting to Pioneer DJ devicesThis unit can be connected to PRO DJ LINK compatible Pioneer DJ devices equipped with a [LINK] terminal (e.g. DJM-900NXS, DJM-2000NXS).For details on connections, also refer to the respective DJ devices’ operating instructions.! A separate contract with and payment to a provider offering Internet services is required.Example of connection with the DJM-900NXSOFFRETURNLLL1 GND 2 HOT3 COLDLRL LINCH3CH4CH1CH2RRRRLRRPHONOCH 4 CH 3CD/ LINE LRPHONOCH 1CD/ LINESIGNAL GND SIGNAL GNDTRSCD/ LINELINEMASTER1 MASTER2 REC OUT BOOTHMIC2 MIDI OUTDIGITALMASTEROUTLINKLRCH 2CD/ LINELINE(MONO)LR (MONO)SENDPOWERAC INONCDJ-2000NXSCDJ-2000NXS CDJ-2000NXS CDJ-2000NXSDJM-900NXSPOWERCONTROLLINKAUDIO OUTR LCONTROL DIGITALOUTrekordboxAC ININTERNET PRO DJ LINKInternetRouter forInternet connectionTo power outlet Power cordSwitching hubComputerLAN cableLAN cableRear panel! Set the DJ player’s player number to the same number as the channel to which the audio cable is connected.This product satisfies electromagnetic noise regulations when it is connected to other equipment through shielded cables and connectors.CAUTIONRisk of major electromagnetic interference. Use an STP cable for the LAN cable.