0202Connecting your equipment15EnConnecting your component with no HDMI terminalThis diagram shows connections of a TV and DVD player (or other playback component) withno HDMI terminal to the receiver.Note• In order to listen to the audio from the TV that is connected to this receiver using a analogaudio cables, set-up for analog audio input is required (see The Input Assign menu onpage 32).• You can only connect one component to the optical input terminal. If connecting otherdevices, please use a different method to connect the audio.In order to listen to the audio from the source component that is connected to this receiverusing an optical cable, first, switch to the DVD (DVD player) or SAT/CBL (set-top box), thenpress SIGNAL SEL to choose the audio signal O1 (OPTICAL1) (see Selecting the audio inputsignal on page 20).• You can only connect one component to the coaxial input terminal. If connecting otherdevices, please use a different method to connect the audio. In order to listen to the audiofrom the source component that is connected to this receiver using a coaxial cable, first,switch to the DVD (DVD player) or SAT/CBL (set-top box), then press SIGNAL SEL tochoose the audio signal C1 (COAXIAL1) (see Selecting the audio input signal on page 20).In order to listen to the audio from the DVD player that is connected to this receiver usinga coaxial cable, first, switch to the DVD input, then press SIGNAL SEL to choose the audiosignal C1 (COAXIAL1) (see Selecting the audio input signal on page 20).HDMIVIDEO AUDIOCOAXIALSPEAKERSANTENNAOPTICAL ASSIGNABLEASSIGNABLEASSIGNABLEOUTIN INA( CD)MONITOROUTDVD INANALOG IN(CD)SAT/CBLINDVD SAT/CBL GAME BD ( TV)IN 11IN 1FM UNBAL75AM LOOP FRONT CENTER SURROUNDR LR LR LOPTICALR LDIGITAL AUDIO OUTANALOG AUDIO OUTOPTICALR LDIGITAL AUDIO OUTANALOG AUDIO OUTCOAXIALVIDEO INVIDEO OUTR LDIGITAL AUDIO OUTANALOG AUDIO OUTOPTICAL COAXIALVIDEO OUTSelect oneTVDVD playerThis connection isrequired in order tolisten to the sound ofthe TV over thereceiver.Select oneSet-top boxSelect one