63GEX-P900DABSelecting the EnsembleYou can switch to an Ensemble offering a desired Service.• Tune to a high or low frequency (Ensemble).By pressing the same button, search stops and the unit switches to standbyfor reception of that Ensemble frequency.Note:• The initial Language Filter setting is OFF.Language Filter OFFPriority is given to the first Service in a received Ensemble. After it isselected, sound of that Service’s Primary Service Component is output.Language Filter ONSearch for a Service Component of the set language among the receivedEnsemble is performed.- When a Service Component is foundSound of that Service Component is output.- When a Service Component is not foundPriority is given to the first Service. After it is selected, sound of thatService’s Primary Service Component is output.Hold for 0.5 secondsHold for 0.5 secondsBasic Operation SpecificationsGeneralPower source .......... 14.4 V DC (10.8 – 15.1 V allowable)Grounding system ........................................ Negative typeMax. current consumption ........................................ 0.6 ADimensions .................... 231 (W) × 28 (H) × 182 (D) mmWeight ...................................................................... 2.5 kgDAB tunerFrequency range(Band “) .......... 174.928 – 239.200 MHz (5A – 13F)(L Band) .... 1,452.960 – 1,490.624 MHz (L1 – L23)Usable sensitivity(Band “) .................................................. – 100 dBm(L Band) .................................................. – 97.5 dBmMode .................................................................. –, —, “, ”AudioSignal-to-noise ratio .................... 94 dB (IEC-A network)Separation .................................................... 94 dB (1 kHz)AntennaType .................................................................. Active typeNote:• Specifications and the design are subject to possi-ble modification without notice due to improve-ments.