Pioneer Elite PRO-530HDI Operating Instructions Manual

Also see for Elite PRO-530HDI: Service manual

20FRONT PANEL FUNCTIONSA flip-down door conceals the INPUT 4 jacks. Push gently andrelease, to open the door. To close the door, lift it back up intoplace.NOTE:If you accidentally pull the door, it may not shut properly. Pushthe door back in to shut it.2 MAIN POWER (OFF/ON) buttonIf the button is OFF, the power of the monitor is shut off and 3STANDBY/ON button on the monitor or TV power on theremote control will not function. Pressing the button againwill turn the monitor ON and the monitor enters the standbymode. In the standby mode, you can turn on the monitor usingthe 3 STANDBY/ON button on the monitor or TV power onthe remote control.3 POWER ( STANDBY/ON) buttonSwitches the monitor between on and standby (note that themonitor consumes a small amount of power (0.5 W) in standbymode.4 INPUT SELECT and SET buttonPress to select your program source. Each press of the INPUTSELECT button changes the selection to the next source.While the menu is displayed, it performs the same operationas the SET/ENTER button on the remote control.5 CHANNEL +, – and |, \ buttonsPress plus (+) or minus (–) to tune to a higher or lower channel.Only the preset channels can be tuned in using these buttons.Press to select or adjust items on the menu screen.6 MENU buttonPress to turn the menu on.Press again to return to normal TV screen.7 VOLUME +, – and », « buttonsPress plus (+) button to increase the volume, press minus (–)button to decrease it.Press to select or adjust items on the menu screen.MENUSETMENUACCESSSTANDBY/ONPOWER CHANNELMAIN POWERSTANDBYSELECTONMENUINPUT2 3 4 5 61PUSH1 POWER STANDBY/ON indicatorsred: STANDBYgreen: when lit; ONwhen flashing; power management in operationINPUT6 TV INPUT 1INPUT 5 INPUT 4 INPUT 3 INPUT 2Interior of thedoor