56EnTV Guide On Screen™ System Operation103 Press / to highlight a channel then press ENTER to goto the Grid Options menu.From the Grid Options menu you can set:• channel – On (display in channel list), Off (don’t display)or Auto Hide (hide when no program information isavailable)• service – the type of service that the channel operateson (cable, etc.)• tune channel – the channel number that the channellisting is tuned to• position – place that the channel appears in thechannel list4 After making all selections for the channel, highlight“done” then press ENTER.• To cancel without saving the changes, select “cancel”.Changing the Default OptionsThe menu provides options to change the default settings forrecordings, reminders, and other general settings.1 Select the “Change Default Options” item.2 Select a default option category.A different panel menu appears for each option.General default options• box size – the initial size of the Info Box (no, small,large, last used)• box cycle – the cycle behavior of the Info Box (no only, smallonly, large only, no & small, no & large, small & large, all)• auto guide – Display TV Guide On Screen™ guideautomatically when you turn on the TVRecord defaults• start – when to start a recording (up to 120 minutes earlieror later than the program start time, or On time)• end – when to end a recording (up to 120 minutes earlier orlater than the program end time, or On time)• recorder – selects a recorder to be used for recording.Remind defaults• auto tune – automatically tunes to the correct channelwhen a reminder becomes due (Yes or No)• when – set the display time for the reminder (15 minutesearly to 15 minutes late, or On time)3 When the settings are complete, highlight “done” thenpress ENTER.• To cancel without saving the changes, select “cancel”.
