Pioneer Elite PRO-110FD Operating Instructions Manual

Also see for Elite KURO PRO 150FD: Specifications Service manual

Contents

70EnAdjustments and Settings11Room Light SensorThis function automatically adjusts the brightness of the displaypanel in accordance with the brightness level of the viewing area.For details, use the following procedure.1 Press HOME MENU.2 Select “Option” ( / then ENTER).3 Select “Room Light Sensor” ( / then ENTER).4 Select “On” or “Off” ( / then ENTER).5 Press HOME MENU to exit the menu.Note• This function is disabled when “OPTIMUM” is selected on the“AV Selection” menu.• This function is not available when PC signals are received.• As this function automatically optimizes image quality, theprocess in which image settings such as brightness and tintgradually change may be seen on the screen. This is not amalfunction.Blue LED DimmerYou can adjust the brightness of the POWER ON indicatordepending on the brightness level of the viewing area. When“Auto” is selected, the brightness of the indicator changes to“High”, “Mid” or “Low” to match the brightness level of theviewing area.1 Press HOME MENU.2 Select “Option” ( / then ENTER).3 Select “Blue LED Dimmer” ( / then ENTER).4 Select “Auto”, “High”, “Mid” or “Low” ( / thenENTER).5 Press HOME MENU to exit the menu.OrbiterThis function automatically shifts the image little by little toreduce the occurrence of the burning.1 Press HOME MENU.2 Select “Option” ( / then ENTER).3 Select “Orbiter” ( / then ENTER).4 Select “Mode 1” or “Mode 2” ( / then ENTER).5 Press HOME MENU to exit the menu.• To cancel this function, select “Off” in step 4.Note• For the Dot by Dot mode, see Selecting a screen size manuallyon page 68.• This function does not operate when PC signals are received.Video PatternYou can display the Video Pattern screen that also helpseliminate after-image when it occurs.1 Press HOME MENU.2 Select “Option” ( / then ENTER).3 Select “Video Pattern” ( / then ENTER).A confirmation screen appears.4 Select “Start” (ENTER).The Video Pattern screen displays.Note• The system is automatically placed into standby one hour afterthe Video Pattern screen has started.• While the Video Pattern screen is on, no buttons operateexcept TVa on the remote control unit, STANDBY/ON and aon the plasma display.• To cancel the Video Pattern screen, press TVa on the remotecontrol unit, STANDBY/ON or a (or slide a up) on the plasmadisplay.• The Video Pattern timer has priority over the sleep timer. Whenthe Video Pattern timer is on, the sleep timer becomes ineffective.Language settingYou can select a language to be used for on-screen display suchas menus from among three languages: English, French, andSpanish.1 Press HOME MENU.2 Select “Option” ( / then ENTER).3 Select “Language” ( / then ENTER).4 Select a language ( / ).5 Press HOME MENU to exit the menu.Item DescriptionOn Activates the Room Light Sensor functionOff Deactivates the Room Light Sensor functionItem DescriptionOff Disables the OrbiterMode 1(default)Enables the display protection function for any screenmode other than "Dot by Dot"Mode 2 Enables the display protection function for all availablescreen modesLanguageMenu English