Pioneer DV-400V-S Operating Instructions Manual

Contents

Connections0214EnConnecting using HDMIIf you have a HDMI equipped monitor ordisplay, you can connect it to this player usinga commercially available HDMI cable.The HDMI connector outputs uncompresseddigital video, as well as almost every kind ofdigital audio that the player is compatible with,including DVD-Video, Video CD/, CD, WMA,MP3, MPEG-4 AAC, DivX video and WMV.• Use an HDMI cable to connect theHDMI OUT interconnect on this player toan HDMI interconnect on a HDMI-compatible monitor.The arrow on the cable connector body shouldbe face up for correct alignment with theconnector on the player.Note• This unit has been designed to becompliant with HDMI (High DefinitionMultimedia Interface). Depending on thecomponent you have connected, using aDVI connection may result in unreliablesignal transfers.• When you change the componentconnected to the HDMI output, you willalso need to change the HDMI settings tomatch the new component (see HDMI Outon page 35, HDMI Resolution on page 36and HDMI Color on page 36 to do this).However, the settings for each componentare then stored in memory (for up to 2components).• The HDMI connection is compatible with44.1 kHz/48 kHz, 16 bit/20 bit/24 bit 2channel linear PCM signals, as well asDoldy Digital, DTS and MPEG audiobitstream.P RPBYCOMPONENT VIDEO OUTVIDEO OUTS-VIDEO OUTDIGITALAUDIO OUT AUDIO OUTHDMI OUTLRCOAXIALHDMI-compatible displayTo HDMIinterconnect