DRM-7000 Operating Instructions4.0 Installation4.1 Positioning the ChangerThe instructions below lead through the physical installation of the DRM-7000.1. Attach the placement fixturesTo stabilize the Changer further, attach the placement fixtures at the corners of the unit• Always be sure to attach theplacement fixtures first• Verify that the placement fixturesare protecting the ports and cableson the back of the unitPlease note that any damage causedto the rear ports or cables as a resultof failing to install the fixtures, voidsthe warranty for that damage.2. Select the installation location for the Changer• The back of the Changer shouldbe at least 50 centimeters(approximately 20 inches) from thewall• The back access panel must beable to fully open in order to add orremove individual disc magazinesor drives- 10 -