Pioneer CP-EU8 Operating Instructions Manual

Also see for CP-EU8: Catalog

ASSEMBLING THE SPEAKER STANDSSpeaker Stand Operating InstructionsThank you for buying this Pioneer product. This speaker stand should only beused with the S-EU8BS-LR Pioneer speaker system. Please read through theseoperating instructions for proper assembly and use. After you have finishedreading the instructions, put them away in a safe place for future reference.BEFORE YOU STARTBefore setting up your speaker system, we recommend reading the operating IMPORTANT :Pioneer assumes no liability whatsoever for damages resulting from assembly,improper mounting, insufficient reinforcement, misuse of the product, acts ofnature, etc.CAUTION :Only use the screws supplied when fixing the speaker to the speaker stand.Do not place the stand on an unstable and/or sloping surface. The stand andspeaker may fall and cause injury.Do not use with any speaker system other than the one for which the unit wasdesigned. The stand may collapse and be damaged and/or the speaker may falland cause injury.When moving the speaker and stand, first remove the speaker from the stand,and then move the stand, holding it by the two stems.Item12345678910Part no.SBA6010SBA6008SBG6001SBA6011SBA6012SBE1036SBE1035Description of goodsBase platePoleTop plateScrew M5 x L50 mm (for pole)Decoupling SpikeBase for decoupling SpikeScrew M4 x L40 mm (for hangup speakers)Screw M4 x L50 mm (for hangup speakers)WasherSpring WasherQty2 pcs2 pcs2 pcs16 pcs8 pcs8 pcs4 pcs4 pcs4 pcs4 pcs342156AB87910910

/ 2

Related manuals for Pioneer CP-EU8