Pioneer CDJ-900 Operating Instructions Manual

Also see for CDJ-900: Connection guide Connection guide Connection guide Connection guide System firmware update instructions

En 21Changing the settingsChanging thesettingsUsing the [MENU/UTILITY] buttonVarious settings on the CDJ-900 can be changed by pressing [MENU/UTILITY].UTILITYONOFF–60dB1QUANTIZESLIP FLASHINGAUTO CUE LEVELMIDI CHANNEL1 21Setting item The CDJ-900’s settings items are displayed here.2Setting The settings for the various items are displayed here.Changing the settings1 Press [MENU/UTILITY] for over 1 second.The [UTILITY] screen is displayed.2 Select and enter the setting item.The cursor moves to the setting.3 Change the setting and enter.The cursor returns to the setting.! Press [BACK] before changing the setting to return to step 2.4 Press [MENU/UTILITY].Press [MENU/UTILITY] to return to the menu screen.List of settingsThe factory default settings are indicated in bold.Optionssettings Setting ranges DescriptionsQUANTIZE ON/OFF For details, see QUANTIZE on page 11.SLIP FLASHING ON/OFFSets whether or not the SLIP indicatorflashes during DJ play using the [SLIP]button.AUTO CUE LEVEL -36dB/-42dB/-48dB/-54dB/-60dB/-66dB/-72dB/-78dBFor details, see Changing the auto cuelevel on page 16.MIDI CHANNEL 1 – 16 －LIBRARY CRE-ATOR LIBRARY/FOLDERSets the browsing method for media onwhich Pioneer MEP-7000 libraries arerecorded.HISTORY NAME － For details, refer to Setting [HISTORYNAME] on the right.DIGITAL OUT 16 bit/24 bitThis switches the number of bits of theaudio signals output from the [DIGITALOUT] terminal.PLAYER No. AUTO, 1 – 4Sets this unit’s player number. Theplayer number cannot be changed whena medium is loaded in this unit.LINK STATUS －When PRO DJ LINK connections aremade, the connection status is dis-played here.AUTO STANDBY ON/OFF For details, refer to Setting the autostandby mode on the right.VERSION No. － Displays the CDJ-900’s software version.Setting the auto standby mode1 Select [AUTO STANDBY] and enter the setting item.2 Select [ON] or [OFF] and enter.When [AUTO STANDBY] is set to [ON], the power management function is acti-vated in the following cases and the standby mode is set.! When no operation whatsoever is performed for over 4 hours with no discloaded or USB device connected, no PRO DJ LINK connection, and nocomputer connected to the USB port (on the CDJ-900’s rear panel)! When the CDJ-900 is operated, the standby mode is canceled.! The CDJ-900 is shipped with the power management function turned on.If you do not want to use the power management function, set [AUTOSTANDBY] to [OFF].Setting [HISTORY NAME]The name of the [HISTORY] recorded on the USB device can be preset.1 Select [HISTORY NAME] and enter the setting item.2 Using the rotary selector to input characters.3 Press the rotary selector to enter.The [HISTORY NAME] setting is changed.! If [HISTORY NAME] is not set, numbers are added sequentially after[HISTORY].! The maximum number of characters that can be set for the [HISTORY] nameis 32, including both letters, numbers and symbols.