8Using Multi Players asTRAKTOR Series Audio Output DevicesSet up the computer and TRAKTOR series in accordance with the following procedures.When Using Windows® (supported OS*: Windows 7, Windows Vista®, Windows XP)1 Install the [Pioneer_CDJ_Driver] driver software into the computer.Either install [Pioneer_CDJ_Driver] from the CD-ROM supplied with the Multi Player, or download thelatest edition from the following website.http://pioneer.jp/support/download/index-e.html2 Select [Pioneer CDJ ASIO] with the [File] → [Audio Setup] function on the TRAKTOR series.3 The Multi Player will be automatically set up at the audio output device.If the settings are not made automatically, set the necessary parameters manually with [File] →[Audio Setup] → [Output Routing].*Only 32-bit applications can be used with the driver software if a 64-bit operating system is in operation.When Using Mac OSIt is not necessary to install the driver software.Set up the computer parameters in accordance with the following procedures if multiple Multi Players are to beused as audio output devices.■ When Using the Mac OS X 10.5.X1 Connect the Multi Player (or players, if more than one are to be connected) to the computer with the useof a USB cable.2 Start up [AUDIO MIDI Settings] from the [Applications]–[Utilities] folder.3 Select [Device Set Editor] from the [Audio] menu.4 Click [+] on the [Device Set Editor] screen to add the new Device settings.5 Select the added Device setting, and then add [CDJ-900] or [CDJ-2000] to it for the required number ofMulti Players.6 Select the Device setting created with procedure 5 with [File] → [Audio Setup] on the TRAKTOR series.7 The Multi Player will be automatically set up at the audio output device.If the settings are not made automatically, set the necessary parameters manually with [File] →[Audio Setup] → [Output Routing].