Menu
Pioneer BDP-170 Operating Instructions Manual
Also see for BDP-170: Operating instructionsService manual
                                                                |
37En07Audio OutputDigital Output Bitstream Select this to output digital audio signals directly.PCM Select this to output digital audio signals converted to 2-channel audiosignals.Reencode When a BD containing secondary audio and interactive audio is played, thetwo audio signals are mixed and converted to Dolby Digital audio or DTSaudio for output.Off Select this to output audio signals other than digital audio signals.Downmix Stereo Surround audio signals converted to linear PCM audio signals are convertedinto 2-channel (stereo) signals for output.Lt/Rt Surround for output (when the connected AV receiver or amplifier, etc., iscompatible with Dolby Pro Logic, the AV receiver or amplifier outputs thelinear PCM audio signals as surround audio signals).Max Sampling Frequency 48k Outputs audio signals that are limited to a sampling frequency below the setsampling frequency from the DIGITAL OUT terminal. Select according to theperformance of the connected device.96k192k• When playing back a sampling frequency file or a disk having a lower than or equal setting compared to the present setting,you can output it at the unchanged sampling frequency.• Sources with sampling frequencies of over 192 kHz cannot be played.• When playing copyright-protected discs or files, the signals are output with the sampling frequency limited to 48 kHz or below,regardless of this setting.DRC (Dynamic RangeControl)*Off Select this to output audio signals without using the DRC function.On Select this to adjust the range between the loudest and softest sounds(dynamic range) for playback at average volume. Use this when it is hard tohear dialog or when watching movies at midnight.Auto Select to switch the DRC setting On/Off automatically according to the inputaudio signal from the disc. This only affects Dolby TrueHD signals.• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.• DRC affects audio signals output from the following audio output terminals:– Analog audio signals output from the AUDIO OUT terminals– Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals• Depending on the disc, the effect may be weak.• The effect may differ depending on the speakers, the AV amplifier settings, etc.*• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.• DRC affects audio signals output from the following audio output terminals:– Analog audio signals output from the AUDIO OUT terminals– Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals• Depending on the disc, the effect may be weak.• The effect may differ depending on the speakers, the AV amplifier settings, etc.HDMIColor Space RGB Select this to output the video signals as RGB signals. Choose this if thecolors seem too faint and the black seems too bright.YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.YCbCr 422 Select this to output the video signals as YCbCr 4:2:2 signals.Full RGB Select this to output the video signals as RGB signals. Choose this if the colorsseem too dense and all the dark colors are displayed in a uniform black.Resolution Auto Select this to choose the resolution of the video signals output from theHDMI OUT terminal automatically.480I/576I Output the video signals from the HDMI OUT terminal with the selectedresolution.The resolution can be changed by pressing HDMI, but Auto cannot beselected.The resolution switches each time HDMI is pressed.480P/576P720P1080I1080PSetting Options Explanation |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved