Pioneer AVM-P9000R Owner's Manual

Also see for AVM-P9000R: Brochure Owner's manual Owner's manual

Contents

93The power switch does notwork.No functions come on.The remote control doesnot work.No sounds are heard.The volume level will notrise.Cables or connectors are notcorrectly connected.The fuse is broken.The battery power is runningout.The remote control is not in thecorrect operation mode.Cables are not connected correctly.The volume is turned all theway down.The front, rear, left and rightspeakers are not properlyadjusted in level balance.Check whether the cables areplugged in correctly and firmly.Remove the cause of the break-ing of the fuse, then replace thefuse. Be very sure the samerated proper fuse is installed.Replace the batteries.(See page 8.)Switch the remote control to theproper mode. (See page 3.)Connect the cables correctly.Increase the volume.(See page 10.)Adjust the relative levelsbetween the speakers correctly.(See page 67.)Troubleshooting7 GeneralSymptom Cause RemedyIf the problem stillremains.Request repairs.\If the problemremains even afterchecking.Reset the unit. (Seepage 7.)\If you think there issomething wrongwith the unit.Before requestingrepairs, check thefollowing chart.Troubleshooting