Pioneer AVIC-5201NEX Installation Manual

Also see for AVIC-5201NEX: Operation manual

Contents

En 5Parts suppliedThis product Power cordGPS antenna MicrophoneMini-jack extensioncableUSB cableMetal sheet Clamp (3 pcs.)Double-sided tapeConnecting the power cord (1)YellowTo terminal supplied with power regardless ofignition switch position.RedTo electric terminal controlled by ignitionswitch (12 V DC) ON/OFF.With a two-speaker system, do not connectanything to the speaker leads that are notconnected to speakers.This productFuse (10 A)Power supply14 cm (5-1/2 in.)Power cordOrange/whiteTo lighting switch terminal.Black (ground)To vehicle (metal) body.Yellow/black (MUTE)If you use equipment with a mutefunction, connect that equipment to theAudio Mute lead. If not, keep the AudioMute lead free of any connections.Blue/white (SYSTEM REMOTE CONTROL)To auto-antenna relay control terminal or antennabooster power control terminal (max. 300 mA 12 VDC). If the vehicle has a glass antenna, connect to theantenna booster power control terminal (max. 300mA 12 V DC).WhiteGreenLeft RightGrayVioletWhite/blackGreen/blackGray/blackViolet/blackFront speaker Front speakerRear speaker Rear speakerNOTEAudio source will be set to mute or attenuate, while thefollowing sounds will not be muted or attenuated. Fordetails, refer to Operation Manual.– Voice guidance of the navigation– Incoming ring tone and incoming voice of thecellular phone that is connected to this productvia Bluetooth wireless technology