En 23English Español Deutsch Français Italiano Nederlands06SectionRDSSelecting alternative frequenciesIf you are listening to a broadcast and the recep-tion becomes weak or there are other problems,the unit will automatically search for a differentstation in the same network which is broadcast-ing a stronger signal.• AF is on as a default.1 Press 5 or ∞ to select AF from the TUNERMENU, and press A.MENU.AF adjustment indications are displayed.2 Press 5 to turn AF on.Press 5 and AF :ON is displayed.3 Press ∞ to turn AF off.Press ∞ and AF :OFF is displayed.Notes• Only RDS stations are tuned in during seektuning or BSM when AF is on.• When you recall a preset station, the tunermay update the preset station with a newfrequency from the station’s AF list. (This isonly available when using presets on the FM1or FM2 band.) No preset number appears onthe display if the RDS data for the stationreceived differs from that for the originallystored station.• Sound may be temporarily interrupted byanother program during a AF frequencysearch.• When the tuner is tuned to a non-RDS stationthe AF indicator flashes.• AF can be switched on or off independentlyfor each FM band.Using PI SeekIf the unit fails to find a suitable alternative fre-quency, or if you are listening to a broadcastand the reception becomes weak, the unit willautomatically search for a different station withthe same programming. During the search, PISeek is displayed and the output is muted. Themuting is discontinued after completion of thePI seek, whether or not a different station isfound.Using Auto PI Seek for preset stationsWhen preset stations cannot be recalled, aswhen travelling long distances, the unit can beset to perform PI Seek during preset recall.• The default setting for Auto PI Seek is off. SeeSwitching Auto PI Seek on page 64.Limiting stations to regional program-mingWhen AF is used to automatically retune fre-quencies, the regional function limits the selec-tion to stations broadcasting regionalprograms.1 Press 5 or ∞ to select REGIONAL from theTUNER MENU, and press A.MENU.REGIONAL adjustment indications aredisplayed.2 Press 5 to turn the regional function on.Press 5 and Regional :ON is displayed.3 Press ∞ to turn the regional function off.Press ∞ and Regional :OFF is displayed.Notes• Regional programming and regional networksare organized differently depending on thecountry (i.e., they may change according tothe hour, state or broadcast area).
