Pioneer AVH-2300DVD Installation Manual

Also see for AVH-2300DVD: Operation manual

Contents

Connecting the power cordSpeaker leadsWhite: Front left White/black: Front left Gray: Front right Gray/black: Front right Green: Rear left  or subwoofer Green/black: Rear left  or subwoofer Violet: Rear right  or subwoofer Violet/black: Rear right  or subwoofer ISO connectorNote:In some vehicles, the ISO connector may be dividedinto two. In this case, be sure to connect to bothconnectors.Note:Depending on the kind of vehicle, thefunction of 2* and 4* may be different.In this case, be sure to connect 1* to 4*and 3* to 2*.1*3*2*4*Yellow (2*)Back-up(or accessory)Yellow (1*)Connect to the constant 12 Vsupply terminal.Connect leads of the same color toeach other.Fuse resistorRed (4*)Accessory(or back-up)Red (3*)Connect to terminal controlled byignition switch (12 V DC).Black (chassis ground)Connect to a clean, paint-free metal location.This productAntenna inputOrange/whiteConnect to lighting switch terminal.Fuse resistorFuse (10 A)RGB inputNavigation system(AVIC-F220 (soldseparately)).Please contact your dealer toinquire about the connectablenavigation system.Insert the 26 pin cable in the directionindicated in the figure.26 pin cable (Supplied with Navigation system)En4Section01 Connecting the units