Menu
Pioneer 2MT700 Installation Manual
Also see for 2AM700: Installation guide
   |
INSTALLATIONTools:Adjustable Wrench Teflon Tape RagsModel Number: 2MT700, 2AM700Warnings and Notes:Check with local plumbing code requirements before installation.This product should be installed by a local listed plumber.Do not use plumbers putty on threads.Installation Steps:Deck Mount Pot-Filler(1) Shut off water supply. Remove old faucet.Clean mounting surface in preparation for newfaucet.PIONEER INDUSTRIES, INC.3325 S. Garfield AveCommerce, CA 90040(800) 338-9468www.pioneerind.com(2) Do not remove plastic arm bracket beforefinish installation to prevent damage on swivelarms. Be sure to place gasket underneath offaucet to form watertight seal.(3) Guide the faucet through mounting hole.Slide the washer from beneath the mountingsurface. Install the locknut with the help ofmounting tool(4) Use faucet inlet supply hose to connectto supply stop. You may need adapter(notincluded) if supply stop outlet size is not 3/8”compression.(6) Remove the aerator from the spout byturning counter-clockwise. Turn on supplystop. Check of any leaks. Make sure all theconnection are secure. Open both handles.Flush and allow water to run at full flow for atleast one minute. Turn off water. Replace theaerator. |
Related manuals for Pioneer 2AM700
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved