Philips 3000 Series Manual

Also see for 3000 series: User manual User manual User manual User manual Manual

>75 % recycled paper>75 % papier recyclé© 2021 Koninklijke Philips N.V.All rights reserved3000.064.2581.2 (7/6/2021)1 2 3EnglishImportant safety informationOnly use the product for its intended purpose. Read this importantinformation carefully before you use the product and its batteries andaccessories, and save it for future reference. Misuse can lead to hazards orserious injuries. Accessories supplied may vary for different products.Warning- Keep the supply unit dry (Fig. 1).- This shaver is waterproof (Fig. 2). It is suitable for use in the bath orshower and for cleaning under the tap. For safety reasons, the shavercan therefore only be used without cord.- Do not modify the supply unit.- This appliance can be used by children aged from 8 years and aboveand persons with reduced physical, sensory or mental capabilities or lackof experience and knowledge if they have been given supervision orinstruction concerning use of the appliance in a safe way andunderstand the hazards involved. Children shall not play with theappliance. Cleaning and user maintenance shall not be made by childrenwithout supervision.- Unplug the appliance before cleaning it with water.- Do not use a damaged appliance. Replace damaged parts with newPhilips parts.- Do not use the supply unit in or near wall sockets that contain an electricair freshener to prevent irreparable damage to the supply unit.- Because of hygiene, only one person should use the appliance.- Only use cold or lukewarm water to clean the appliance.- Never use compressed air, scouring pads, abrasive cleaning agents oraggressive liquids to clean the appliance.- Water may drip from the socket at the bottom of the shaver when yourinse it. This is normal and not dangerous because all electronics areenclosed in a sealed power unit inside the shaver.- Only use original Philips accessories or consumables. Only usedetachable supply unit HQ8505.- Charge, use and store the product at a temperature between 10 °C and35 °C.- Keep product and batteries away from fire and do not expose them todirect sunlight or high temperatures.- If the product becomes abnormally hot or smelly, changes color or ifcharging takes longer than usual, stop using and charging the productand contact Philips.- Do not place products and their batteries in microwave ovens or oninduction cookers.- Do not open, modify, pierce, damage or dismantle the product or batteryto prevent batteries from heating up or releasing toxic or hazardoussubstances. Do not short-circuit, overcharge or reverse charge batteries.- If batteries are damaged or leaking, avoid contact with the skin or eyes. Ifthis occurs, immediately rinse well with water and seek medical care.Electromagnetic fields (EMF)This Philips appliance complies with all applicable standards andregulations regarding exposure to electromagnetic fields.SupportFor all product support such as frequently asked questions, please visitwww.philips.com/support.Recycling- This symbol means that electrical products and batteries shall not bedisposed of with normal household waste (Fig. 3).- Follow your country’s rules for the separate collection of electricalproducts and batteries.Removal of built-in rechargeable batteryThe built-in rechargeable battery must only be removed by a qualifiedprofessional when the appliance is discarded. Before removing the battery,make sure that the appliance is disconnected from the wall socket and thatthe battery is completely empty.Take any necessary safety precautions when you handle tools toopen the appliance and when you dispose of the rechargeablebattery.When you handle batteries, make sure that your hands, the productand the batteries are dry.To avoid accidental short-circuiting of batteries after removal, do notlet battery terminals come into contact with metal objects (e.g. coins,hairpins, rings). Do not wrap batteries in aluminum foil. Tape batteryterminals or put batteries in a plastic bag before you discard them.1 Check if there are screws in the back or front of the appliance. If so,remove them.2 Remove the back and/or front panel of the appliance with a screwdriver.If necessary, also remove additional screws and/or parts until you seethe printed circuit board with the rechargeable battery.3 Remove the rechargeable battery.