Patton electronics SmartNode 4900 Quick Start Manual

Also see for SMARTNODE 4900: User manual Getting started guide

Contents

Patton electronics SmartNode 4900 Quick Start Manual Manual pdf 7 page image

Downloading a configuration example, adapting it to your network, and loading it onto the SmartNode 7SmartNode 4900 Quick Start GuideDownloading a configuration example, adapting it to your network,and loading it onto the SmartNodePatton provides a collection of configuration templates on the support page at www.patton.com/smartnode—one of which may be similar enough to your application that you can use it to speed up configuring the Smart-Node. Simply download the configuration note that matches your application to your PC. Adapt the configu-ration as described in the configuration note to your network (remember to modify the IP address) and copythe modified configuration to a TFTP server. The SmartNode can now load its configuration from this server.Note If your application is unique and not covered by any of Patton’s configura-tion templates, you can manually configure the SmartNode instead of load-ing a configuration file template. In that case, refer to the SmartWareSoftware Configuration Guide for information on configuring the SmartNodedevice.In this example we assume the TFTP server on the host with the IP address 172.16.1.11 and the configurationnamed SN.cfg in the root directory of the TFTP server.172.16.1.99(if-ip)[eth0]#copy tftp://172.16.1.11/SN.cfg startup-configDownload...100%172.16.1.99(if-ip)[eth0]#After the SmartNode has been rebooted the new startup configuration will be activated.172.16.1.99(if-ip)[eth0]#reloadRunning configuration has been changed.Do you want to copy the 'running-config' to the 'startup-config'?Press 'yes' to store, 'no' to drop changes : noPress 'yes' to restart, 'no' to cancel : yesThe system is going downAdditional informationFor detailed information about configuring and operating guidance, set up procedures, and troubleshooting,refer to the martWare Software Configuration Guide and the SmartNode 4900 User Manual on www.pat-ton.com/smartnode.When you issue the reload command, the SmartNode will askif you want to copy the running configuration to the startup con-figuration. Since you just downloaded a configuration file to thestartup configuration you must answer this question with NO.Otherwise, the downloaded configuration will be overwrittenand lost!IMPORTANT

/ 8

Related manuals for Patton electronics SMARTNODE 4900