Patton electronics SL4050/10 Getting Started Manual

Also see for SL4050/10: Specification sheet Specification sheet Getting started guide Specifications Specifications

Contents

Patton electronics SL4050/10 Getting Started Manual Manual pdf 39 page image

Network Setting—DHCP 39SmartLink 4050 Series Getting Started Guide 3 • Using the configuration menuFigure 11. Network Settings windowNetwork Setting—DHCPClick on Network Settings to display the configuration window (see figure 11). Select the method used to con-nect to the Internet:• DHCP—Select DHCP if you have cable Internet (see section “DHCP Server” for details)• PPPoE—Select PPPoE if your ISP uses PPPoE (most DSL users choose PPPoE) (see section “DHCPServer” for details)• Static IP—Choose the Static IP network setting if the wide area network IP address is provided to you byyour ISP (see section “DHCP Server” for details)Figure 12. DHCP configuration windowDHCP ServerDynamic host configuration protocol (DHCP) server address. This IP address information is obtained auto-matically from your ISP.DNS SettingThe DNS address is provided by your ISP.