Viewing Network Events 105FS6300 NMS Getting Started Guide 10 • Managing Network EventsViewing details of an eventYou can view the details of a network event in the list in several ways:• Select a row in the table. Click on the View menu at the top of the screen, then select Details.• Right-click on a row in the table, and select Details from the pull-down menu.• Select a row in the table, then press Alt+D.• Double-click on a row in the table.Table 2 shows information about network event details.Viewing alarms related to an eventIf an event is significant, it will be converted into an alarm. To view alarms related to an event:1. Click on Network Events (under Fault Management) in the menu tree.2. Select the row of the event that you would like to view alarms for in the table.3. Click on the View menu at the top of the screen, and select Alarms;OR, Right-click on the row and select Alarms from the pull-down menu;OR, Press Ctrl+L.4. A window will display showing only the alarms for that selected event.Table 2. Network Event DetailsProperty DescriptionIndex Specifies a unique ID created for each of the events that are generated.Severity Specifies the severity of the event, such as Critical, Major, Minor, Clear, Warning, Info.Message Specifies the message associated with the event.Category Specifies the category to which the event belongs. Example: Topology.Domain Specifies the domain-specific information which is based on physical location, functionalcategorization, or logical categorization of the source of the event.Network Specifies the network to which the event belongs to.Node Specifies the node to which the event belongs to. For example, if the event is for an inter-face, the node value is specified as interface parent node.Failure Object Specifies the specific entity (in the source) that has failed and is primarily responsible forthe event.Source Specifies the exact source (network, node, interface) of the event.Help URL Specifies the URL for locating the help documentation on clicking the Help button in thesame dialog box.Date/Time Specifies the date and time when the event was generated.GroupName Specifies the group name to which the event belongs.
