Menu
Party Robotics Bartendro ShotBot Getting Started Manual
            | |
BartendroTMShotBotCleaning and MaintenanceFor longest tube life, you should clean all of Bartendro’s tubing afterevery use.Step 1Get three tall glasses or containers. Fill one with hot soapy water, onewith clean water, and keep the third one empty.Step 2Go to Admin > dispensers, lift the flexible tubing out of the liquid orbottle that it’s in and use the “turn on” button to drain the liquid fromthe tubing into your empty glass.Step 3Place the drained tube in your container of hot soapy water and whileholding your empty glass under the spout, press the “clean” button.The button is located at the bottom of Admin > dispensers. This willrun the dispenser long enough to wash out the tube.Step 4Repeat step 3 but with the glass of clean water. Sanitizing solutionslike Star San (beer brewing sanitizer) may also be used. Do not usehousehold chemicals.Step 5Finally, remove the tubes from the clean water and press the “clean” or“turn on” button once more to empty the clean water from the tubingand prepare it for its next use.You should replace the inner beige Dispenser tubing after 500 hoursof use (actual rotation time). If you plan on not using the bot for overone month, you should remove the beige tubing from the pump-head.Instructions on doing this can be found at www.partyrobotics.com/docs.-10- |
Related manuals for Party Robotics Bartendro B001V1
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved