Parkside PSBM 500 A2 Operation And Safety Notes

Also see for PSBM 500 A2: Operation and safety notes Operation and safety notes Operation and safety notes

Contents

Parkside PSBM 500 A2 Operation And Safety Notes Manual pdf 6 page image

6 GBIntroductionImpact drill PSBM 500 A2Q IntroductionWe congratulate you on the purchase of your newdevice. You have chosen a high quality product. Theinstructions for use are part of the product. Theycontain important information concerning safety,use and disposal. Before using the product, pleasefamiliarise yourself with all of the safety informationand instructions for use. Only use the unit as describedand for the specified applications. If you pass theproduct on to anyone else, please ensure that youalso pass on all the documentation with it.Q Proper useThe tool is intended for Impact drilling into brick,concrete and stone as well as drilling into wood,metal, ceramics and plastic (see Fig. B-E). The clock-wise / counter clockwise rotation direction switch alsoallows the device to be used as a driver. Any otheruse or modification to the device shall be consideredas improper use and could give rise to considerablerisk of accident. The manufacturer will not accept li-ability for loss or damage arising from improper use.The device is not intended for commercial use.Q Features1 Quick-action drill chuck2 Front casing3 Back casing4 Changeover switch “drill / percussion drill”5 Locking button for ON / OFF switch6 ON / OFF switch7 Rotational direction switch8 Depth stop9 Wing screw10 Additional handle (see Fig. A)Q Included items1 Impact drill PSBM 500 A21 Auxiliary handle1 Depth stop1 Operating instructionsQ Technical dataNom. voltage: 230–240 V∼ 50 HzRated power: 500 WNo-load rotationalspeed: max. 3000 min-1Percussion rate: max. 48000 min-1Chuck capacity: max. 13 mmDrilling in steel: max. ø 10 mmDrilling in wood: max. ø 20 mmDrilling in concrete: max. ø 13 mmProtection class: II /Noise and vibration data:Measured values for noise are determined in accor-dance with EN 60745. The A-weighted noise levelof the electrical power tool are typically:Sound pressure level: 95.2 dB(A)Sound power level: 106.2 dB(A)Uncertainty K: 3 dBWear ear protection!Impact drilling in concrete:Vibration emission valueah, ID= 12.137 m / s2UncertaintyK = 1.5 m / s2Drilling in metal:Vibration emission valuea h, D= 5.237 m / s2UncertaintyK = 1.5 m / s2The vibration level specified inthese instructions was measured in accordance withan EN 60745 standardised measurement processand can be used to compare equipment. The vibration