7GB/IE Included items1 Impact drill PSBM 500 A11 Auxiliary handle1 Depth stop1 Carry case1 Operating instructions Technical dataNom. voltage: 230 V~ 50 HzRated power: 500 WNo-load rotationalspeed: 50 - 3000 min–1Chuck capacity: max. 13 mmDrilling in steel: max. ø 10 mmDrilling in wood: max. ø 20 mmDrilling in concrete: max. ø 13 mmProtection class: II /Noise and vibration data:Measured values for noise are determined in accor-dance with EN 60745. The A-weighted noise levelof the electrical power tool are typically:Sound pressure level: 86 dB(A)Sound power level: 97 dB(A)Uncertainty K: 3 dBWear ear protection!Impact drilling in concrete:max. Vibration emission valueah, ID= 10.2 m / s2UncertaintyK = 2.0 m / s2Drilling in metal:max. Vibration emission valuea h, D= 6.5 m / s2UncertaintyK = 1.5 m / s2WARNING! The vibration level given in theseinstructions has been measured in accordance witha standardised measurement procedure specifiedin EN 60745 and can be used to compare devices.Different uses of the device give rise to different vibra-tion levels and in many cases they may exceed thevalues given in these instructions. It is easy to underes-timate the vibration load if the electrical power toolis used regularly in particular circumstances.Note: If you wish to make an accurate assessmentof the vibration loads experienced during a particu-lar period of working, you should also take intoaccount the intervening periods of time when thedevice is switched off or is running but is not actual-ly in use. This can result in a much lower vibrationload over the whole of the period of working.General safety advice forelectrical power toolsWARNING! Read all the safety adviceand instructions! Failure to observe the safetyadvice and instructions may result in electric shock,fire and / or serious injury.Keep all the safety advice and instructionsin a safe place for future reference!The term “electrical tool” used in the safety advicerefers to electrical tools powered by mains electricity(by means of a mains lead) and electrical toolspowered by rechargeable batteries (without amains lead).1. Workplace safetya) Keep your working area clean andwell lit. Untidy or poorly lit working areascan lead to accidents.b) Do not work with the devicein potentially explosive envi-ronments in which there areinflammable liquids, gases or dusts.Electrical power tools create sparks, which canignite dusts or fumes.Introduction / General safety advice for electrical power tools

Proper use

Included items

Electrical safety

Careful handling and use of electrical power tools

Caution utility services

Setting the direction of rotation

Warranty

Declaration of conformity / Producer

technische daten

sicherheit von personen

achtung leitungen

wartung und reinigung

Parkside PSBM 500 A1 - MANUAL 3 Operation And Safety Notes

PSBM 500 A1 - 3

PSBM 500 A1 IMPACT DRILL

SCHLAGBOHRMASCHINE PSBM 500 A1

Parkside PSBM 500 A1 - MANUAL 3 Operation And Safety Notes

Product

Learn More

Legal