Paramount Fitness KLD7003S Manual

Also see for KLD7003S: Use and care guide

Contents

Paramount Fitness KLD7003S Manual Manual pdf 8 page image

8 --1. Attach wheels to tank assembly.Line up holes in wheel withcorresponding holes in base and insert 2pcs M8x16 screw (A)through holes. Finger tighten bolts. Be sure that wheels areparallel to base and fully tighten the bolts.Hardware Used : A M8X16 2X2. Attach 4pcs protection guard to the holes on top of tankassembly.Using 8pcs M6 nuts (B) to tighten protectionguards.Hardware Used : B M6 8XM8 Bolt 3XM8 Washer 6XM8 Wing nut 3XHardware Used :ASSEMBLY3. Insert 3pcs M8 bolts (C) into holes on screen cover. Tighten bolts securely.Attach 3pc M8 washers (D) over the bolts. Place the reflector onto thebolts and attached 3pcs M8 washers (D) over bolts and onto reflector.Secure with 3 pcs wing nuts(E). Do not over tighten.