Pantech pursuit II P6010 User Manual

Contents

Pantech pursuit II P6010 User Manual Manual pdf 77 page image

020304050607080177Alert messageIf you experience any problem while using your mobilephone, please refer to the following checklist. If theproblem still persists, contact your dealer or nearestcarrier.When the “Insert SIM Card” message appears:Make sure the SIM card is correctly installed. Check to seeif the SIM card is working properly. If it does not work, tryto clean the contact points of the card with a dry cloth. Ifit is out of order, take it to your service provider.When the “Messages full” message appears:The received or saved messages are full in your phonememory. You need to delete some messages.When the “Phone and SIM messages are full.Delete Messages” message appears:The received or saved messages are full in your phoneand SIM card memory. You need to delete somemessages.When the “Password” message appears inPhone locked state:Enter the phone password. The default passwordis”1234”. If you cannot remember the password, contactyour nearest carrier.When the “Enter PIN1” message appears:Input PIN1. If you cannot remember it, contact yourservice provider.You can still receive calls even if your mobile phonebecomes locked after entering the incorrect PIN1 onthree consecutive attempts.When the “No Service” or “Network Search”message appears:If you cannot make/receive a call when you are indoorsor underground where the signal strength is poor,move toward a window or go out to an open area. If youstill cannot make a connection, contact your serviceprovider.