38/1428. Press [Done].NOTE: Categories are shared between your contacts and tasks. A category will remain in the list of sharedcategories as long as it is assigned to at least one contact or task.Assign a ring tone to a contactTo easily identify who is calling you by the ring tone, you can assign a custom ring tone to each contact.1. On the Home screen, press the left soft key [Start] [All Programs].2. Select Contacts and press OK.3. Select a contact, and press OK.4. Press the right soft key [Menu] select [Edit] and press OK.5. Using the Navigation Key, scroll down to Custom ring tone.6. Select the ring tone you want.7. Press [Done].Create a speed dialYou can create a speed dial for a phone number, e-mail address, or Web page address that is stored inContacts.1. On the Home screen, press the left soft key [Start] [All Programs].2. Select Contacts and press OK.3. Select the contact for whom to create a speed dial and press OK.4. Select the phone number, e-mail address, or Web page address for which to create a speed dial.5. Press [Menu] and select Add to Speed Dial, then press OK.6. In Keypad assignment, select the speed dial number to use.7. Press [Done].NOTE: The number 1 is reserved for calling your voicemail box.Using speed dialsSet up speed dial codes to allow you to call contacts by pressing only one (or two) buttons from the Homescreen.1. On the Home screen, press and hold the number on the keypad that you have assigned as a speeddial for the phone number, e-mail address, or Web page.2. If the speed dial is in two digits, press the first digit, and press and hold the second digit.3. The phone dials the phone number, opens a new e-mail message, or goes to the Web page.View and edit a speed dialYou can view or edit all the contacts you’ve assigned to speed dial by entering the Speed Dial menu from theStart soft key.1. On the Home screen, press the left soft key [Start] [All Programs].2. Select [Applications] [5.Speed Dial] and press OK.3. Select a contact you want to change and press OK key.4. Make any changes and press [Done].Delete a speed dialDeleting a Speed Dial can be done at any time by following these instructions.1. On the Home screen, press the left soft key [Start] [All Programs].2. Select [Applications] [Speed Dial] and press OK.3. Select the speed dial to delete.4. Press [Menu] and select Delete from the popup menu.
