Panasonic i-Pro WV-NF302 Operating Instructions Manual

Also see for WV-NP304: Product catalog Integration note Brochure Reference Comparison chart

Contents

Panasonic i-Pro WV-NF302 Operating Instructions Manual Manual pdf 7 page image

7!6 Audio output button * 3Turns on/off the audio transmission (play audio fromthe PC on the camera speaker). This button will bedisplayed only when "Audio output", "Interactive (fullduplex)" or "Interactive (half duplex)" is selected for"Audio mode" on the setup menu. ( SetupInstructions)The button blinks while the audio transmission isbeing carried out except the case of setting to"Interactive (full duplex)".When this button is clicked, the button will turn intothe button and audio from the PC will not beheard.Audio volume can be adjusted (Low/Middle/High) bymoving the volume cursor .Notes:• When a user is using the audio transmission func-tion with "Interactive (half duplex)" selected, thereceiver button and the transmission button will beinoperable for the other users. When "Interactive (fullduplex)" is selected, the transmission button is inop-erable for other users.• Possible duration of audio transmission is up to 5minutes per transmission. When 5 minutes havepassed, the audio transmission function will be can-celed and the audio reception function will automati-cally be turned on. To turn the audio transmissionfunction on, click the button again.• When the camera is restarted, the adjusted volumelevel (for both the audio transmission and reception)will return to the level that had been set on the[Audio] tab on the setup menu.( Setup Instructions)• Actual volume level will change in three steps eventhough the volume cursor can be adjusted minutely.!7 SD recording status indicatorThe status of the SD recording can be checked withthis indicator.When the SD recording starts, this indicator will lightred. When the SD recording stops, this indicator willgo off.This indicator will be displayed only when "Manual"is selected for "Save trigger" on the setup menu.( Setup Instructions)!8 Main area *2Images from the camera will be displayed in thisarea.The current time and date will be displayed at theselected position in the time and date format set onthe setup menu. ( Setup Instructions).Click a desired point in the main area on the "Live"page that is to be the center of the angle of view.The camera moves to adjust the position in order toset the clicked point as the center when images arebeing displayed at 2x or 4x.*1 Only operable by users whose access level is "1.Administrator"*2 Only operable by users whose access level is "1.Administrator" or "2. Camera control" when "On" isselected for "User authentication"( Setup Instructions).*3 Operable by users who belong to the access levelselected for "Permission level of audio trans./recep."on the [Audio] tab of the "Image/Audio" page( Setup Instructions).Refer to Setup Instructions for further information aboutthe access level.Note:When operated by a lower access level user,images displayed on the screen may be changedtemporarily. This does not affect operation of thecamera.