Panasonic i-Pro WV-NF302 Operating Instructions Manual

Also see for WV-NP304: Product catalog Integration note Brochure Reference Comparison chart

Contents

Panasonic i-Pro WV-NF302 Operating Instructions Manual Manual pdf 4 page image

4Monitor images on a PCThe following are descriptions of how to monitor images from the camera on a PC.Monitor images from a single cameraImportant:• To enhance the security, change the password forthe user "admin". It is recommended to change thispassword periodically.• When displaying multiple MPEG-4 images on a PC,images may not be displayed depending on the per-formance of the PC.Notes:• Up to 16 users can access the camera concurrentlyregardless of the image type (JPEG/MPEG-4) thatthe current access users are monitoring. Dependingon the set values for "Bandwidth control(bit rate)"and "Max bit rate (per client)", the maximum concur-rent access number may be less than 16 users.When 16 users are concurrently accessing, theaccess limit message will be displayed for users whosubsequently attempt to access. When "Multicast" isselected for "Transmission type" of "MPEG-4", userswho are monitoring MPEG-4 images will not be limit-ed to access.• When "On" is selected for "MPEG-4 transmission"( Setup Instructions), an MPEG-4 image will bedisplayed. When "Off" is selected, a JPEG image willbe displayed. It is possible to display a JPEG imageeven when "On" is selected for "MPEG-4 transmis-sion". In this case, the refresh interval will be limited.• The refresh interval of JPEG images will be limitedto 15 fps at the maximum when transmitting JPEGand MPEG-4 images simultaneously even when aframe-rate-prioritized bit rate is selected at "Max bitrate (per client)" of "MPEG-4".Step 1Start up the web browser.Step 2Enter the IP address designated using the Panasonic IPsetup software in the address box of the browser.Example when entering an IPv4 address:http://192.168.0.10Example when entering an IPv6 address:http://URL registered using IPv6 addresshttp://[IPv6 address]Important:• When the HTTP port number is changed from "80",enter "http://IP address of the camera + : (colon) +port number" in the address box of the browser, forexample, "http://192.168.0.11:8080".• When the PC is in a local network, configure theproxy server setting of the web browser (under"Internet Options…" under "Tools" of the menu bar)to bypass the proxy server for the local address.Step 3Press the [Enter] key on the keyboard.→ The "Live" page will be displayed.When "On" is selected for "User authentication", theauthentication window will be displayed before dis-playing live images for the user name and passwordentries. The default user name and password are asfollows.User name: adminPassword: 12345