Menu
Panasonic et-jpc100bu Installation Instructions Manual
                            |
ENGLISH - 3Read this fi rst! (continued)CAUTIONDo not install this product in a location where salt damage occurs or corrosive gas is generated.Doing so may may cause falling due to corrosion.Do not use the projector together with dimmers such as a light controller.Doing so will result in the damage to the components inside the projector and will cause fire.Do not put excessive force on the projector by hanging on the projector or dangling any object.Doing so will result in falling of the projector and injuries.Mount this product in the specified orientation to a flat ceiling or a ceiling with a slope of up to 45°.Mounting this product to an inappropriate surface such as to a wall, floor, or ceiling with a steep slope ormounting it in the wrong orientation may cause a falling accident.Install the ceiling mount screws and bolts so that they do not touch any metal inside the ceiling.If they touch metal inside the ceiling, a fire or electric shock may result.When disconnecting the power cord, be sure to hold the power connector.If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electricshocks will result. Panasonic disclaims all liability for any accidents or any damage caused by the installationof the ceiling mount bracket using methods that are not described in these InstallationInstructions or methods that do not use the parts specifi ed in these Instructions. If products are no longer being used, they should be dismantled and removed by thecertified personnel as soon as possible. |
Related manuals for Panasonic et-jpc100bu
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved