– Example when entering an IPv4 address: http://192.168.0.10:8080– Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080To access the cameras using the HTTPS protocol, enter as follows:Example of entry: https://192.168.0.10/• Available number of characters: 1 - 128 characters• Default: (Cam. 1) selfcamera, (Cam. 2 - 16) not registeredIMPORTANT• When accessing the camera using the HTTPS protocol, install the security certificate of the camera todisplay images on the monitor. (®page 182)• “Network Camera Recorder with Viewer Software Lite” which supports live monitoring and recordingimages from multiple cameras is available. For further information, refer to our website(http://security.panasonic.com/pss/security/support/info.html).• This camera is specified when “selfcamera” is displayed for the IP address or host name.Note• When using the host name, it is necessary to configure the DNS settings of the PC to be used for themulti-screen display. Refer to the network administrator for information on the DNS setting of PCs.[Camera title]Enter the title of the camera. The entered camera title will be displayed on a multi-screen.• Available number of characters: 0 - 20 characters• Unavailable characters: " &• Default:– (Cam. 1) Varies as follows depending on the model in use.WV-SW598SW598SW598 /WV-SC588SC588SC588 /WV-SW397SW397 /WV-SC387SC387– (Cam. 2 - 16) None (blank)Note• When selecting a 16 split-screen, some characters of the camera title to be displayed may not bedisplayed.• Even when “16:9” is selected for the aspect ratio, the multi-screen is displayed in 4:3.134 Operating Instructions12 Configure the multi-screen settings [Multi-screen]
