[Set] buttonApplies the picture in picture settings.[Preview screen >>] buttonYou can check the configured picture in picture image with a still image.Note• In order to check the picture in picture image in the preview screen, “Live” must be selected for “Picturein picture mode”.IMPORTANT• Settings will not be applied if the [Set] button is not clicked.• The picture in picture function cannot be used when the cropping function is being used. When usingthe picture in picture function, select “Off” for “Cropping”.• When the privacy zone and cropping area overlap, the picture in picture function will not operate. Setthe cropping area so that it does not overlap the privacy zone.• When the lens distortion compensation function is used at the same time as the picture in picturefunction, the cropping position of the cropping area may move out of alignment.• If motion is detected in the area where the sub image is being combined, the actual movements cannotbe viewed in the image being combined. Check the movements in an image with a different imagecapture size that is not being combined.• The cropping area may move out of alignment when the “Image capture mode” setting is changed.Make sure to check the cropping area after changing the “Image capture mode” setting.• The cropping area may move out of alignment when the “Extra optical zoom” setting is changed. Makesure to check the cropping area after changing the “Extra optical zoom” setting.Operating Instructions 13715 Configure the settings related to advanced view [Advanced view]