7The network cameras WV-SW355/WV-SW352 are designed to operate using a PC on a network(10BASE-T/100BASE-TX), and can be installed under eaves (sheltered outdoor).By connecting to a network (LAN) or the Internet, images and audio from the camera can be moni-tored on a PC via a network.Note:• It is necessary to configure the network settings of the PC and its network environment tomonitor images from the camera on the PC. It is also necessary to install a web browser on thePC.PrefaceMain functionsIntroduction of Super Dynamic(☞ Operating Instructions (PDF))Super Dynamic compensates brightness on a pixel-to-pixel basis so that it produces clearer imageseven if objects have various illumination intensities.H.264/MPEG-4 and JPEG triple encodingH.264/MPEG-4 dual stream output and JPEG output can be simultaneously provided.* Either H.264 or MPEG-4 is selectable.Auto focus (AF) functionIt is possible to adjust the focus automatically by moving the focus ring of the lens with the opera-tion button of this camera or the setup menu.Black & white modeImages will be displayed clear even at night since the camera will be automatically switched fromthe color mode to the black and white mode under low illumination condition.Power over Ethernet functionWhen connecting with a PoE (Power over Ethernet) device, power will be supplied by simply con-necting a LAN cable. (IEEE802.3af compliant)Interactive communication with audioBy using the audio output connector and the microphone in connector, receiving audio from thecameras on a PC and transmitting audio from the PC to the cameras is available.SDHC/SD memory card slot equippedIt is possible to save H.264 videos and JPEG images on the SDHC/SD memory card manually atan alarm occurrence, during the period of the schedule, or on a web browser. It is also possible tosave JPEG images at a network failure occurrence. (Download is possible.)(Recommended SDHC/SD memory card ☞ page 47)