Panasonic WV-SP306 Installation Manual

Also see for i-Pro WV-SP302: Product catalog Integration note Product catalog Operating instructions Comparison chart

Panasonic WV-SP306 Installation Manual Manual pdf 20 page image

20Insert/remove an SDHC/SD memory cardImportant:• Before inserting an SDHC/SD memory card, turn off the power of the camera first.• When inserting an SDHC/SD memory card, make sure the direction.• Before removing the SDHC/SD memory card, select "Not use" for "About SD memory card" onthe [SD memory card] tab of "Basic" on the setup menu first. Turn off the power after "Not use"selection, and then unload the SDHC/SD memory card. When the SDHC/SD memory card isinserted or removed with the power on, data in the SDHC/SD memory card may be damaged.(☞ Operating Instructions)z Open the slide cover on the side of the camera, and then insert an SDHC/SD memory card intothe SDHC/SD memory card slot.x If necessary, loosen the screw of the clamp for SDHC/SD memory card and tighten the screwafter rotating the clamp 90° clockwise.(Recommended tightening torque: 0.19 N·m {0.14 lbf·ft})c Close the slide cover on the side of the camera.v To remove the SDHC/SD memory card, rotate the clamp for SDHC/SD memory card 90degrees counterclockwise, push the memory card to unlock it, and remove the memory cardfrom the SDHC/SD memory card slot.ABFSDCARD LOCKABFSDCARD LOCKABFSDCARD LOCKTWTWTWLabel face downwardScrew of the clamp forSDHC/SD memory cardABFSDCARD LOCKABFSDCARD LOCKABFSDCARD LOCKABFSDCARD LOCKTWTWTWLabel face downwardScrew of the clamp forSDHC/SD memory cardABFSDCARD LOCK(This illustrationrepresents WV-SP306.)