Panasonic WV-SFV631L Important Information Manual

Also see for WV-SFN611L: Operating instructions Important information Installation guide

Contents

Panasonic WV-SFV631L Important Information Manual Manual pdf 21 page image

21• BasicWV-SFV631L/WV-SFV611L WV-SFR631L/WV-SFR611LWV-SFN631L/WV-SFN611LPower source: 12 V DC±10 %, PoE (IEEE802.3af compliant: DC36-57 V)Power consumption:When IR LED is ON(PoE: Class 0 device)SF V631LDC power supply:12 V DC/1080 mA/Approx. 12.9 WPoE Device:48 V DC/270 mA/Approx. 12.95 W*SF R631L SF N631LDC power supply:12 V DC/760 mA/Approx. 9.1 WPoE Device:48 V DC/240 mA/Approx. 11.1 WSF V611LDC power supply:12 V DC/1010 mA/Approx. 12.1 WPoE Device:48 V DC/270 mA/Approx. 12.95 W** Maximum power consumptionon the camera power input side.SF R611L SF N611LDC power supply:12 V DC/690 mA/Approx. 8.2 WPoE Device:48 V DC/200 mA/Approx. 9.4 WStandby power *1: SF V631LDC power supply:12 V DC/370 mA/Approx. 4.4 WPoE Device:48 V DC/110 mA/Approx. 5.1 WSF R631L SF N631LDC power supply:12 V DC/370 mA/Approx. 4.4 WPoE Device:48 V DC/110 mA/Approx. 5.1 WSF V611LDC power supply:12 V DC/310 mA/Approx. 3.6 WPoE Device:48 V DC/90 mA/Approx. 4.2 WSF R611L SF N611LDC power supply:12 V DC/310 mA/Approx. 3.6 WPoE Device:48 V DC/90 mA/Approx. 4.2 WOperating environmentAmbient operating temperature:Ambient starting temperature:Ambient operating humidity:–45 °C to +50 °C{–49 °F to 122 °F}–30 °C to +50 °C{–22 °F to 122 °F}*220 % to 90 % (no condensation)–10 °C to +50 °C{14 °F to 122 °F}–10 °C to +50 °C{14 °F to 122 °F}20 % to 90 % (no condensation)Storage environmentStorage temperature:Storage humidity:–30 °C to +60 °C {–22 °F to 140 °F}20 % to 95 % (no condensation)IR LED irradiation distance: 30 m {98.43 feet}Monitor output (for adjust-ment):VBS: 1.0 V [p-p]/75 Ω, composite, ø3.5 mm mini jack (monaural)An NTSC or PAL monitor can be connected to the camera(use the selector switch or software to select the monitor type).MONITOR OUT conversion plug included(ø3.5 mini-jack⇔RCA jack)External I/O terminals: ALARM IN 1 (DAY/NIGHT IN)/ ALARM IN 2 (ALARM OUT)/ALARM IN 3 (AUX OUT) (x1 each)DAY/NIGHT IN, ALARM OUT, and AUX OUT can be used bychanging the settings of Terminal 1, Terminal 2, and Terminal 3.Specifications