1.6 Monitor images from multiple camerasImages from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras)can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras inadvance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered.(®page 132)IMPORTANT• When displaying images on a 16-screen, panning, tilting and zooming operations become unavailablefor images from cameras with Pan/Tilt/Zoom functions.• When the “Image capture mode” type is “2 Monitor” or “Quad stream”, fisheye images are displayed.(®page 95)• When “On(NTSC)” or “On(PAL)” is selected for “Monitor out”, images are not displayed.• When the power is turned off or the LAN cable is disconnected while displaying images, displayingimages on a multi-screen from the “Live” page will become unavailable.Note• When displaying images on a 4-screen, panning, tilting and zooming operations become available onlyfor images from cameras with Pan/Tilt/Zoom functions. Refer to our website(http://security.panasonic.com/pss/security/support/info.html) for further information about thecompatible cameras and their versions.• Only JPEG images can be displayed on a multi-screen. Audio will not be heard.• When an image with the “16:9” aspect ratio is displayed on a multi-screen, it is stretched vertically tofit the “4:3” aspect ratio. When the aspect ratio of images is “1:1”, images are stretched horizontally.• “Network Camera Recorder with Viewer Software Lite” which supports live monitoring and recordingimages from multiple cameras is available. For further information, refer to our website(http://security.panasonic.com/pss/security/support/info.html).1. Click the desired [Multi-screen] on the “Live” page.→ Images from the registered cameras will be displayed on a selected multi-screen (screen can be splitup to 16 areas). The following are instructions when displaying on a 4-split screen.CABTo show 1 camera screen, click the [Live] button.You can also click “1” below “Multi-screen” or “Back” to display the camera's “Live” page.Click the [Multi-screen] button to display images from cameras in a multi-screen of 4 to 16 screens.Operating Instructions 251 Monitor images on a PC
