Error indications relating to NTPCategory Indication DescriptionConnection error No response from the NTP server. • The IP address of the server may beincorrect. Check if the IP address of theserver is configured correctly.• The NTP server may be down. Ask thenetwork administrator.Internal error Undefined error. • An error occurred in the NTP function.Check if the NTP settings are configuredcorrectly.Synchronizing withNTP succeeded.NTP update succeeded. • Time correction succeeded.Log indications relating to HTTPSCategory Indication DescriptionHTTPS Self-signed Certificate - Generated • Generation of the self-signed certificate iscomplete.Self-signed Certificate - Deleted • Deletion of the self-signed certificate iscomplete.Certificate Signing Request -Generated• Generation of the CSR (Certificate SigningRequest) is complete.CA Certificate - Installed • Installation of the server certificate iscomplete.CA Certificate - Deleted • Deletion of the server certificate iscomplete.Previous CRT key - Applied • Previous CRT key is applied.CRT key - Generated • Generation of the CRT key is complete.Log indications relating to loginCategory Indication DescriptionLogin User name or IP address • The login user name will be displayedwhen “On” is selected for “User auth.”.• The IP address of the PC currentlyaccessing to the camera will be displayedwhen “On” is selected for “Host auth.”.196 Operating Instructions20 About the displayed system log