[SSL]Select “On” if you want to use SSL encryption when sending E-mail notifications for alarm occurrences or the“Diag.” function. When you select “On”, the authentication method will be set to “SMTP”. Set the user nameand the password used for authentication.• Default: OffNote• Some SMTP servers may not support SSL.• SSL supports SMTP over SSL, but STARTTLS is not supported.• When “On” is selected, the SMTP port number may need to be set to 465. Ask your Internet serviceprovider for the appropriate settings.[Address 1] - [Address 4]Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.• [Alarm] checkbox: When the checkbox is selected, the E-mail notification will be performed upon an alarmoccurrence.• [Diag.] checkbox: When the checkbox is selected, the E-mail notification will be provided in the followingcases.– When notification of the remaining capacity of the SD memory card has been provided– When the SD memory card has become full– When the SD memory card cannot be recognized• [Destination E-mail address]: Enter the destination E-mail address.– Available number of characters: 3 - 128 characters– Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_),and the hyphen (-).To delete the registered address, click the [Delete] button respective to the desired address.[E-mail subject]Enter the E-mail subject.• Available number of characters: 0 - 50 characters[E-mail body]Enter the E-mail body.• Available number of characters: 0 - 200 charactersNote• Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” whenthe SD memory card has become full, or “The SD memory card cannot be detected.” when mountingof the SD memory card failed.150 Operating Instructions16 Configuring the network settings [Network]
